Author Topic: History of this FED  (Read 4014 times)

Offline The Hemi Guy

  • Newbie
  • *
  • Posts: 6
    • View Profile
    • American Hemi Speed Centre
  • Your Best Time: Nil Time Yet
  • Your Engine: Chrysler 392 HEMI Engine - Vancharger 6-71 blower
  • Your Track: To Race At Whyalla South Australia
  • Your Vehicle: Woody Gilmore 165 inch wheelbase FED
History of this FED
« on: April 29, 2016, 01:12:07 AM »
Hi All
Looking to find some information regarding this Front Engine Dragster.

It raced at New England Dragway in the late 1960s. Apparently held the track record. Had a 426 HEMI installed ....then recently a small block Chevrolet.

Originally driven by Ron McCassey from Canada.

Any information would be appreciated.

Kind regards

- Rob

 

 

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1138
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: History of this FED
« Reply #1 on: April 29, 2016, 02:16:20 PM »
If you are on facebook try New England Dragway 60's and 70's someone there might be able to help you .

Offline The Hemi Guy

  • Newbie
  • *
  • Posts: 6
    • View Profile
    • American Hemi Speed Centre
  • Your Best Time: Nil Time Yet
  • Your Engine: Chrysler 392 HEMI Engine - Vancharger 6-71 blower
  • Your Track: To Race At Whyalla South Australia
  • Your Vehicle: Woody Gilmore 165 inch wheelbase FED
Re: History of this FED
« Reply #2 on: April 29, 2016, 02:34:53 PM »
Thank you
Much appreciated.
I will try the FB page as suggested.
Kind regards
- Rob 

Offline JeffV8

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
  • Your Track: Quaker city
  • Your Vehicle: 164" Woody Gilmore Flexie
Re: History of this FED
« Reply #3 on: May 01, 2016, 02:17:54 PM »
Good luck on your search. It took me 2 years 😱  Looks like a Woody Gilmore from the front.