Author Topic: Falcon Gasser 383 SBC  (Read 5825 times)

Offline Nightmare AA/FA

  • Full Member
  • ***
  • Posts: 166
    • View Profile
  • Your Track: Bakersfield, CA
  • Your Vehicle: 1934 Ford AA/FA
Falcon Gasser 383 SBC
« on: May 11, 2014, 08:50:11 AM »
1961 Ford Falcon, all steel car with lexan windows. Every nut and bolt has come off and the car is 100% rebuilt. New CM 10 point roll cage. 383 roller SBC with 4 bolt mains and RHS 220cc/64cc stage 3 heads, cast iron,Herbert Roller Cam part number C6E .645-630 lift, MSD box and 2 step, Comp Cam Ultra Pro Roller Rockers, 13.1 cr, tunnel ram with two Quick Fuel carbs, T400 trans with brake and cooler built by Racer Brown in Ventura CA. Aluminum drive shaft in to a new Ford 9 inch, full spool and 4.86 gears, new axles and wheel studs.

New carpet inside with metal flake door panels. Car runs 10.50s @130 all day with an easy tune. The car is capable of running 9's with more left.

16,000 OBO

I can email photos

six six one 714-3158

Car is in So CA
« Last Edit: May 20, 2014, 08:48:15 PM by Nightmare AA/FA »

Offline JeffV8

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
  • Your Track: Quaker city
  • Your Vehicle: 164" Woody Gilmore Flexie
Re: Falcon Gasser 383 SBC
« Reply #1 on: May 11, 2014, 04:02:16 PM »
I like your falcon. To bad you're so far away.


Offline Nightmare AA/FA

  • Full Member
  • ***
  • Posts: 166
    • View Profile
  • Your Track: Bakersfield, CA
  • Your Vehicle: 1934 Ford AA/FA
Re: Falcon Gasser 383 SBC
« Reply #2 on: May 20, 2014, 08:08:44 AM »
I've updated the info.

Offline Nightmare AA/FA

  • Full Member
  • ***
  • Posts: 166
    • View Profile
  • Your Track: Bakersfield, CA
  • Your Vehicle: 1934 Ford AA/FA
Re: Falcon Gasser 383 SBC
« Reply #3 on: May 24, 2014, 10:00:32 PM »
$12,000 rolling

Offline Nightmare AA/FA

  • Full Member
  • ***
  • Posts: 166
    • View Profile
  • Your Track: Bakersfield, CA
  • Your Vehicle: 1934 Ford AA/FA
Re: Falcon Gasser 383 SBC
« Reply #4 on: June 02, 2014, 08:39:51 PM »
Sold