« previous next »
Pages: [1]   Go Down

Author Topic: Nitro Cam Springs  (Read 3924 times)

Offline captndiet

  • Newbie
  • *
  • Posts: 36
    • View Profile
  • Your Track: Rogersville Missouri
  • Your Vehicle: Front Engine Dragster
Nitro Cam Springs
« on: February 01, 2014, 06:27:11 PM »
Spud

What springs do you recommend for your SBC Nitro Cam?

Seat pressure?

Jeff
Logged

Offline Spud Miller

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 332
    • View Profile
    • Fuel Injection Ent., LLC
Re: Nitro Cam Springs
« Reply #1 on: February 02, 2014, 08:39:10 PM »
240 to 260 on the seat is what I've always used. With and without a rev kit, never any problems...which tells me you could probably get away with less unless you're running a lot of RPM. Mine only ever sees 7200 RPM or so tops.

Spud
Logged

Fuel Injection Enterprises, LLC
     Mechanical Injection
     Magnetos
     EFI Conversions

Offline captndiet

  • Newbie
  • *
  • Posts: 36
    • View Profile
  • Your Track: Rogersville Missouri
  • Your Vehicle: Front Engine Dragster
Re: Nitro Cam Springs
« Reply #2 on: February 02, 2014, 08:44:59 PM »
Spud

That's good to know.

There are two schools of thought anymore. 300+ and Just Enough.

I tend to agree with the Just Enough theory.

Thanks for your time.

Jeff
Logged

Offline Zooman

  • Newbie
  • *
  • Posts: 36
    • View Profile
  • Your Track: Willowbank Australia
  • Your Vehicle: injected nitro digger
Re: Nitro Cam Springs
« Reply #3 on: February 02, 2014, 10:03:36 PM »
Just 270 on the seat in my early hemi.
The cam is suprisingly mild and max revs at 8200.

Cheers
Graham Slapp
Logged
Pages: [1]   Go Up
« previous next »