Author Topic: Lets talk MFI and engine temps  (Read 1098 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1917
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Lets talk MFI and engine temps
« on: July 11, 2023, 06:26:55 PM »
We all know engine performance changes with when temps move up if running alky and especailly with MFI.  How much movement in ET have you seen with temp increase?

I use few tricks to control engine heat when running injection.Like I would run anything else. Have a setup that allows me to richen combo .010 with solenoid. Cools engine quick. Pretty sure everyone has used shutoff to raise temp if needed. Have any tricks care to share? Normally heat is not issue near as much as building it is.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot