Author Topic: Just saying hello  (Read 4808 times)

Offline 58Apache

  • Newbie
  • *
  • Posts: 20
    • View Profile
  • Your Best Time: none
  • Your Engine: 572 Aluminum Keith Black Chevy
  • Your Track: Top Gun raceway, Fallon Nv
  • Your Vehicle: 58 Chevy Apache 3100 truck
  • General Location: Reno, Nv
Just saying hello
« on: February 11, 2020, 02:13:40 PM »
Hi guys, I am new to the site. I found out about it through Fuel injection Ent. I have a 1958 Chevy apache 3100 step side truck. 572 Aluminum Keith black chevy, 90's pro stock tunnel ram, twin 1050 dominators, mallory super mag 3, 15:1 compression, brodix bb2 plus heads flowed and ported by EPD. Hughes custom built turbo 400, Alston cage, and back half, profab 9 inch rear end, 5:14 richmond gears and strange axles. I am hoping to run B or C gas depending on how fast the truck really is. It's been a 23 year project that I am hoping will be done by the first of april.     

Offline Finnish Fireball

  • Jr. Member
  • **
  • Posts: 87
    • View Profile
  • Your Best Time: 4.69 / 147 mph 1/8 mile
  • Your Engine: 540 cid BBC 8-71 Hampton e85
  • Your Track: Kauhava
  • Your Vehicle: Fireball Slingshot
  • General Location: Finland
Re: Just saying hello
« Reply #1 on: February 12, 2020, 01:25:55 AM »
Welcome to this quiet forum, truck sounds nice let's see some pictures?
I'm fast. I can make five mistakes while others think.

Offline 58Apache

  • Newbie
  • *
  • Posts: 20
    • View Profile
  • Your Best Time: none
  • Your Engine: 572 Aluminum Keith Black Chevy
  • Your Track: Top Gun raceway, Fallon Nv
  • Your Vehicle: 58 Chevy Apache 3100 truck
  • General Location: Reno, Nv
Re: Just saying hello
« Reply #2 on: February 12, 2020, 09:57:25 AM »
Hi Fireball. Your ride sounds quick. I am hoping to run low 8's, but we'll have to see. It's 4300 feet here in Reno and in Fallon, so low 9's is what I am stooting for here. But, at sea level I am hoping for low 8's. I 'll try to get you some photo's.. 

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Just saying hello
« Reply #3 on: February 12, 2020, 01:29:30 PM »
Welcome! 

Norcal Nostalgia will be @ Top Gun in May. Look forward to meeting you.

www.norcalnostalgiaracing.com

https://www.facebook.com/groups/norcalnostalgiaracing/

Greg
El Dorado County, CA
www.meansracing.com

Offline 58Apache

  • Newbie
  • *
  • Posts: 20
    • View Profile
  • Your Best Time: none
  • Your Engine: 572 Aluminum Keith Black Chevy
  • Your Track: Top Gun raceway, Fallon Nv
  • Your Vehicle: 58 Chevy Apache 3100 truck
  • General Location: Reno, Nv
Re: Just saying hello
« Reply #4 on: February 13, 2020, 01:24:39 AM »
Greg, I look forward to it. I am so excited to finally get the truck to the track. Do you run and Sacramento and Bakersfield? I am hoping to run at both this year. 

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Just saying hello
« Reply #5 on: February 13, 2020, 11:14:50 AM »
I will test @ Sac once in a while, like this saturday.  There are about 5 of us going out.

I race Famoso about 6 times a year.  Samoa, Sonoma, Fallon, and Redding are the other main stays. 
Greg
El Dorado County, CA
www.meansracing.com

Offline 58Apache

  • Newbie
  • *
  • Posts: 20
    • View Profile
  • Your Best Time: none
  • Your Engine: 572 Aluminum Keith Black Chevy
  • Your Track: Top Gun raceway, Fallon Nv
  • Your Vehicle: 58 Chevy Apache 3100 truck
  • General Location: Reno, Nv
Re: Just saying hello
« Reply #6 on: February 14, 2020, 11:12:35 AM »
Yea, I am hoping to run Sac, Redding, Sonoma, Boise, Vegas, and Bakersfield. There is a cool out law track in Idaho falls I want to run at some point. Memphis Street outlaws were up there last year.  I look forward to meeting you at the track. I am hoping to have the truck at the April test and tune at Fallon.