Author Topic: The way we were  (Read 6792 times)

Offline Bentwings

  • Newbie
  • *
  • Posts: 12
    • View Profile
  • Your Best Time: None
  • Your Engine: 392 Chrysler, 426 Chrysler, sbc
  • Your Track: None
  • Your Vehicle: 41Willys blown sbc streetrod
  • General Location: Midwest
The way we were
« on: June 04, 2018, 04:26:17 AM »
The first installment is being processed. Just hold on.
« Last Edit: June 04, 2018, 04:28:04 AM by Bentwings »

Offline Bentwings

  • Newbie
  • *
  • Posts: 12
    • View Profile
  • Your Best Time: None
  • Your Engine: 392 Chrysler, 426 Chrysler, sbc
  • Your Track: None
  • Your Vehicle: 41Willys blown sbc streetrod
  • General Location: Midwest
Re: The way we were
« Reply #1 on: June 04, 2018, 04:34:59 AM »
Dealing with the Nostalgia movement I thought some of you guys and gals would like to hear it from a couple that were there and participated in this madness.

This is a FC a very good friend, Tom Frazier owned.
.  Crew chief was Ed Raba (RIP)  I was designated driver.  Tom originally bought the car from Bill Schifsky as the Cox toy Pinto. Tom repainted it and we ran the Pinto one year as an alcohol car (B.B./FC ) then in the fall we completely rebuilt the chassis to this car and added the Monza body. Again we ran as an alcohol car but with a 500” Hemi and a good 8-71 blower and Lenco three speed. I was going to tool and die school and as a class project made a 50% od blower pulley. They weren’t available at the time so we were ahead of the game.

Tom and Eddie had worked for me on a top fuel funnycar for two years before so both were well familiar with these things.

We ran with the Chicago based alcohol FC circuit as well as our own match races and a few Nhra races.

These pictures are at Union Grove, Wisconsin on a Memorial Day Show.  Often these events were a double header so we ran the qualifying rounds at the Grove then beat it up north to a track in norther Wisconsin for their evening match race show then made the all night drive back to the Grove for the big show.  It was a good money maker for us if we made all the rounds.

For the years we ran this car we only lost one round due to breakage and I don’t recall ever smoking the tires off the line.  We weren’t the fastest but I had pretty good reflexes and we often won it on the line.  We were a killer in 1/8 mile tracks.

I’ll post up some more stories or see if I can get Tom to boost my dim memory.  He has many more pictures too.

Byron

Sent from my iPad
« Last Edit: June 04, 2018, 06:28:55 AM by GlennLever »

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Re: The way we were
« Reply #2 on: June 04, 2018, 12:23:08 PM »
please add the dates

Offline Bentwings

  • Newbie
  • *
  • Posts: 12
    • View Profile
  • Your Best Time: None
  • Your Engine: 392 Chrysler, 426 Chrysler, sbc
  • Your Track: None
  • Your Vehicle: 41Willys blown sbc streetrod
  • General Location: Midwest
Re: The way we were
« Reply #3 on: June 05, 2018, 08:40:08 PM »
I think this was 75 or 76 as this was one of the first Monza FC. Bodies.  We had a tough time with tech as it was heavily alterered. The rear wheel wells were stretched and widened, we initially had Lexan covers on the headlight (we lost the argument), the windshield opening was altered, tech claimed the front wheel bumps were too tall, while we didn’t stretch the body beyond spec, it was done in the molding. There were other mods to really make it a clean car. Thanks to a couple big name guys that did essentially the same modifications, we were allowed to run.

A side note, notice how far the motor is out compared to other cars of the era. I believe it was 65-66 inches while most were 60 or less.  We did some home work since I was back in engineering school on weight distribution and power application.  I made some assumptions as hard data was not available and data logging was not available back then.

We wanted the car light and strong and to go straight without a weight bar.  I made spring loaded wheelie bars that were adjustable. We had a weight bar that we filled with lead shot ( it was too heavy for tech) but served its purpose to distract tech.  We simply emptied it before we ran. It was polished aluminum. We were not under weight if I drank enough water and didn’t sweat too much during the run. With the motor way out there was plenty of weight on the front.  The front spoiler barely passed for height.

Someone has a picture in the lights of the windshield flexing.  It was just 1/8” thick.  We found that spilled alcohol would start cracks where ever there were holes drilled or the cutout for the blower was.  You could bring cracked windshields in for free replacement as they were considered window glazing.  Some clown bragged that he spilled alcohol on his racing.  Well that ended the free replacements. They only lasted a month so we had several pre fitted  and a spare in the trailer.  Two for double headers.

These motors were cast iron stock blocks that we updated in the shop I worked at.  The same for the heads.  I ported one set and said never again. They only lasted 15-20 runs tops. So we were constantly on the lookout for heads and blocks.  The aluminum blocks were just coming out and were unavailable to us small guys. Aluminum heads had not arrived yet either. 

Valve springs were the major maintenance item.  10 runs and they were history.  The spring technology wasn’t what it is today by a long shot. They were really expensive and hard to get the good ones back then. 
We had the first .750 lift roller cam in the area and only a few west coast alcohol guys had them.  It was a huge gain and the real power adder for this car.  It was hard to keep up with the valve train however. Fortunately I had access to the auto shop for equipment.  It just took a lot of time.

I’m trying to get Tom to come on board as he remembers more details than I.  My job was to get the car down the track and into the next round.  Tom and Eddy took care of most between round stuff. I viewed the starting line, both lanes, any markers, wind, track conditions, Christmas tree position ( they changed track to track) I also spied on the competitors, ( hey no harm in looking), I looked at attitudes, behavior and competitiveness.  When you are the underdog use everything you can get.

That’s it for tonight
Byron

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: The way we were
« Reply #4 on: June 05, 2018, 09:11:03 PM »
 :)
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline retroboy

  • Full Member
  • ***
  • Posts: 221
    • View Profile
  • Your Track: Whyalla
  • Your Vehicle: FED
Re: The way we were
« Reply #5 on: March 08, 2022, 01:26:19 PM »
I really enjoyed your story and photos. Thanks for sharing