« previous next »
Pages: [1]   Go Down

Author Topic: nozzle size  (Read 4243 times)

Offline spookie

  • Jr. Member
  • **
  • Posts: 61
    • View Profile
  • Your Best Time: 8.92 1/4 5.59 1/8
  • Your Track: Quarter Aces drag-o-way
  • Your Vehicle: F.E.D.
nozzle size
« on: July 27, 2014, 07:45:48 AM »
just changed heads.Went from .066 pill to .o54 .Do I need to change nozzles? Have #0 pump with Kinsler  code m410 nozzles.{.026 ?} Picked up 1/10 in 1/4mi Seems to run fine,worring about to high of pump pressure. Thanks for help.
Logged

Offline Spud Miller

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 332
    • View Profile
    • Fuel Injection Ent., LLC
Re: nozzle size
« Reply #1 on: July 27, 2014, 09:09:10 AM »

 What is the highest RPM you achieve on a pass?

 Spud
Logged

Fuel Injection Enterprises, LLC
     Mechanical Injection
     Magnetos
     EFI Conversions

Offline spookie

  • Jr. Member
  • **
  • Posts: 61
    • View Profile
  • Your Best Time: 8.92 1/4 5.59 1/8
  • Your Track: Quarter Aces drag-o-way
  • Your Vehicle: F.E.D.
Re: nozzle size
« Reply #2 on: July 28, 2014, 03:09:52 PM »
Highest rpm 6800. leave at 4800, shift at 6000. P.S. this is on alcohol.
Logged

Offline Spud Miller

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 332
    • View Profile
    • Fuel Injection Ent., LLC
Re: nozzle size
« Reply #3 on: July 28, 2014, 06:06:15 PM »

 I'm showing you're making nearly 160 PSI at 6800 RPM. For a gear pump (Waterman, Kinsler...) that's no problem really. If it's a traditional Enderle/Hilborn style pump, I'd put bigger nozzles in it.

.028's and a .058 pill instead would be the same tuneup but with 40 PSI less pressure at the stripe.

Spud
Logged

Fuel Injection Enterprises, LLC
     Mechanical Injection
     Magnetos
     EFI Conversions
Pages: [1]   Go Up
« previous next »