« previous next »
Pages: [1]   Go Down

Author Topic: Tubes or no tubes.  (Read 3928 times)

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Tubes or no tubes.
« on: June 10, 2014, 06:56:05 AM »
I have a low horsepower 120" front engine dragster 400hp. The prior owner Had mickey thompson et slicks 29.5 x 10.5 mounted on craiger ss reverse center rims tubeless had a 100 runs on this set up no issues. What do you guys think of this. also any way to get these tires not to leak air so much. also tires not screwed to rim.
Logged

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1138
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Tubes or no tubes.
« Reply #1 on: June 10, 2014, 04:25:34 PM »
Larry go tubeless . A lot less rotating weight !
Logged

Offline BK

  • Sr. Member
  • ****
  • Posts: 311
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: Tubes or no tubes.
« Reply #2 on: June 10, 2014, 05:53:42 PM »
If you coat the sidewalls on the inside with dish washing liquid it helps stop the leakage. I used Dawn for that fresh scent.  As far as screws go probably not that big a deal. Put a mark on the tire and wheel. If they barely move I wouldn't worry. If it moves an inch I would probably put some screws in them or try raising the air pressure.
Logged

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Re: Tubes or no tubes.
« Reply #3 on: June 10, 2014, 06:40:57 PM »
Thanks
Logged
Pages: [1]   Go Up
« previous next »