FrontEngineDragsters.Org Forum

Technical => Matt Shaff's Engine Shop => Topic started by: Oldschool on April 26, 2014, 05:51:57 PM

Title: Good Oil Pan
Post by: Oldschool on April 26, 2014, 05:51:57 PM

What would be a good oil pan for my FED with a carbureted 434 SBC ?

Title: Re: Good Oil Pan
Post by: dreracecar on April 27, 2014, 02:01:30 PM

Without spending a fortune --Milodon

Title: Re: Good Oil Pan
Post by: ricardo1967 on April 27, 2014, 05:08:28 PM

A couple years ago I was finishing assembling my SBC 400 and ordered Moroso PN 21017. Got two really bad pieces in a row (bent rail corners, cracked welds, very wavy rails, etc). The instructions warns that 1/4" rocking is acceptable... Other than frustration, I was sad to see Moroso's quality going downhill like that.

So I got a Canton and it was a night and day difference. May tray Milodon next time.