FrontEngineDragsters.Org Forum
Drag Racing Discussions => Altereds => Topic started by: hotrodharley on April 12, 2014, 09:54:10 PM
-
WHAT SHOULD I SET MY TOE IN TO ON MY fuel altered?..has M/W spindles if that makes a differance.ALSO .after i made my belly pan umder eng. i've noticed loading in trailer i scrap pan some loading car;;thinking going with taller front tire to give me a little more ground clearance..will doing this have any effects[pro/cons]on going taller tire?have 24x4.5x15 M/T now;;
-
Have you tried raising the front of the trailer? Or a longer ramp? I don't think taller tires will affect much of anything including clearance. Generally toe in is 1/8th to maybe 3/16ths of an inch. Make sure you are pushing out on the front of the tires with the cars weight on them when you measure. They may have a little play and you don't want it turning into toe out going down the track. If you think that little bit of play feels like too much it probably is.
-
Agree that toe should be 1/6 to 1/8 max. Since I have a short wheel base Altered (116 inch) I have the same problem with loading. The solution is to reduce th angle of the ramp with extensions or lay down some boards on the existing ramp. I put 2x12 boards under both tires the length of the ramp. Problem was solved.
-
you want the CoG as low as possible in an altered, so I wouldn't consider raising the ride height for this.
I has the same problem, I built two wooden hump / ramps which sat on the trailer and raised the front of the car sufficiently until the lowest point cleared ramp to deck transition. Nothing fancy, just some ply and 2x4 .
-
Abbie Abramovich from Arvada was on the hunt for thesis dissertation services ucf
Maighdiln Hakeem came across the answer to a search query thesis dissertation services ucf
apa format thesis proposal
tib uni hannover dissertation
<a href="https://writeadissertation.com/">editor for dissertation</a>
<a href="https://topswritingservices.com/">custom writing</a>
<a href="https://custompaperwritingservices.com/">best research paper writing services</a>
master's thesis paper length (https://battletech-mercenaries.com/merc-net/viewtopic.php?f=4&t=2455&p=57208#p57208) d30d969