FrontEngineDragsters.Org Forum

Social => Your Builds / Photo Gallery => Topic started by: LuckyBastard on February 11, 2014, 08:55:58 PM

Title: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 08:55:58 PM

Been working on it for a while but hope to be on the down Hill side.

First Pics are when I bought it and stripped it down.

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:00:30 PM

more

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:00:54 PM

1

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:01:51 PM

Painted and going back together

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:03:20 PM

more

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:07:31 PM

went and got some bling on the chassis

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:09:10 PM

little closer

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:10:47 PM

The body before but dont have the after yet its in the shop being painted

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:12:54 PM

Built this 440 to go in it but have problems getting it in the frame rails so have decided to put a SBC with a blower in it.

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 11, 2014, 09:14:31 PM

This will be fun

Title: Re: My FED Build or RE-Build
Post by: Totally T on February 12, 2014, 03:17:25 AM

We discussed possible oil pump issues on Facebook...was there other problems than that?

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 12, 2014, 12:59:04 PM

Yes cant get a starter in there with the motor plate. Or get the engine to sit down where it needs to be. So getting a Altered to put the 440 in and going with a blown SBC like it had in it.

Title: Re: My FED Build or RE-Build
Post by: LuckyBastard on February 12, 2014, 01:00:16 PM

New top fit and gitting painted.