FrontEngineDragsters.Org Forum
Drag Racing Discussions => Front Engine Dragsters => Topic started by: ricci32 on April 24, 2013, 04:55:58 PM
-
Since the FED i built is custom to fit me 5'8" #240 and 3' at the shoulders everything on my car is a little custom the chassis is 23"wide etc. I need a butterfly wheel that was comfortable and looked right with the car made a cardboard templet pickeup some 1/8 aluminium plate a good friend is a automotive machinest and has cnc machine take a look at what we made.
-
The hand grips are multi colored lexan red and black laminated then edges buffed like a street rod knob.
-
pics
-
We have a fabricator on our hands.
-
Not really a fabricator just enjoy making my own stuff. Racing dirt modifieds for 25 years you get used to repairing your own stuff im not used to working on a car that will stay nice. Thanks
-
Not really a fabricator just enjoy making my own stuff. Racing dirt modifieds for 25 years you get used to repairing your own stuff im not used to working on a car that will stay nice. Thanks
Nice, no cussing allowed on this forum
-
Someday I would like to replace the billet handles on my butterfly for wooden ones. For the nostalgic effect.
-
looks good! :D
Was planning on building one but I found one for free from a guy's shop in our building. Couldn't pass that up
-
Looks good! How did ya hold the Butterfly still, to get your pattern? ;)