FrontEngineDragsters.Org Forum

Drag Racing Discussions => Front Engine Dragsters => Topic started by: classicjohn on February 03, 2017, 09:21:08 AM

Title: front axle stablizer rods
Post by: classicjohn on February 03, 2017, 09:21:08 AM

Where is a good source to get the chrome rods that connect from the axle to the frame ? 

Title: Re: front axle stablizer rods
Post by: rooman on February 03, 2017, 10:08:02 AM

If you are talking about the radius rods any competent chassis shop can make them. Normally they are 3/4" tube with 3/8" rod ends. Do you have brackets on the axle and tabs on the frame to attach them? Chrome will be up to you in most cases. Post a photo of your deal and it will be a lot easier to provide the correct advice.

Roo