FrontEngineDragsters.Org Forum

Technical => Spud Miller's Cave => Topic started by: Totally T on June 06, 2015, 07:55:53 AM

Title: Hilborn vs. Kinsler
Post by: Totally T on June 06, 2015, 07:55:53 AM

With regards to the flowed pills from both companies, are they the same as in a .110 flowed kinsler is the same as a .110 flowed Hilborn?

Title: Re: Hilborn vs. Kinsler
Post by: fuel749 on June 06, 2015, 08:34:42 AM

Close maybe, but you'd probably have to flow a dozen to get two exactly the same.

Title: Re: Hilborn vs. Kinsler
Post by: dreracecar on June 06, 2015, 09:23:57 AM

In our world, not enough difference, Its takes me 3 sizes(up or down ) to see any change with my Enderle's. Kinsler has some nice stuff compared to Hilborn, but you pay for it and both work the same

Title: Re: Hilborn vs. Kinsler
Post by: Totally T on June 06, 2015, 02:17:58 PM

This is on my Kinsler 2 7/16 stack but it gets a little funky as Tim Engler put a bird catcher on it.  It has a Enderle cube BV with the main bypass tee'd at the inlet with a standard Enderle fitting. The have the pill holder in the T but then it was flowed with a jet can with the flowed Kinsler pill instead of using the screw in Enderle.

I'm really thinking that I will just pull the jet can out and screw the pill into the holder like it's meant to be.

(http://i62.photobucket.com/albums/h94/sandstreet/54080F50-D8DF-471F-ADAD-EB980AD5715E_zpsjllrqubc.jpg)

Title: Re: Hilborn vs. Kinsler
Post by: slingshot383 on June 09, 2015, 09:37:46 AM

Tim does some neat work!  Great idea, forward facing inlet for a stack injection system.