FrontEngineDragsters.Org Forum
Drag Racing Discussions => Altereds => Topic started by: 23Taltered on May 18, 2015, 05:54:59 AM
-
Where are you guys finding downswept headers for a sbc in you altered? I am having a difficult time sourcing them
-
Try Racing Junk . A header for a tube chassis car should be good for an altered .
-
Check out Shoenfeld. The link should take you to the page you want.
http://www.schoenfeldheaders.com/sprintdyno4.html
-
Try Racing Junk . A header for a tube chassis car should be good for an altered .
They will fit but they will stick out quite a ways.
-
I bought mine through Speedway. Schoenfeld #1024L. I would post picture if I knew how to resize it.
-
So you are saying they make a header that is not a zoomie? Man what will they come up with next?
-
I have tried sprint car headers and they don't stick out far enough to clear the body
-
what about a hedman weld up kit ? i think there is a good 6-8" of tubing before the 1st bend where they go down
http://www.jegs.com/p/Hedman-Husler/Hedman-Husler-Hedders-Weld-Up-Kits/763828/10002/-1
-
If you follow the link I have a set of these forsale. I thought they stuck out too far on mine. May be what you are looking for.
They include 31/2" collectors and adapter plates. They are coated but show a little rust through the coating.
https://sdparts.com/details/dynatech-competition-exhaust-systems/dyn502-907401
$350.00 plus shipping
-
I got a set of DynaTech weld up headers for my Altered and a friend welded them up for me. They have nice bends and was easy to move where I wanted them before welding. On my car the old Hedman headers hit the steering bar and my new headers fit great. When you weld them up you can make sure they fit like you want before you weld anything. Similar to these.
http://www.jegs.com/i/Dynatech/329/762-91510/10002/-1?parentProductId=750012#moreDetails