FrontEngineDragsters.Org Forum
Technical => Roo Man's Room => Topic started by: Hotrod200 on November 22, 2014, 05:48:00 PM
-
Have been wanting to build a front engine car for a long time and I have now accumulated alot of the parts and looking at many pics of chassis online, etc. I want to build a very period looking 180 inch 1968-1970 dragster but I want it as safe as I can, if I was to build it to the latest NHRA heritage series specs 2.2c I think it is for a front engine, would the chassis be to stiff for a blown alcohol combo?
Any thoughts or advice going into this is much appreciated, how far to go engine out etc...
Thanks
-
You want to build to the latest 2.4 spec which is legal to 6.00. 2.2 is a fuel spec and unless you plan to run fuel and go quicker then 6 seconds, its a lot of extra tubing for what you are planning--kinda overkill
-
If that is what yours is built to I'd really like to see some pics of yours, looking for as much info as possible, thanks my email is shayne_stewart@yahoo.com if you are will to share some info pics, etc