FrontEngineDragsters.Org Forum

Classifieds (Please No Dealers) => Wanted to buy => Topic started by: PSweeney on September 23, 2014, 05:23:47 AM

Title: B&M Shifter Cable 5-6ft long ?
Post by: PSweeney on September 23, 2014, 05:23:47 AM

anybody got one ?

Title: Re: B&M Shifter Cable 5-6ft long ?
Post by: GlennLever on September 23, 2014, 06:05:12 AM

McKinney or  Control Cables Inc in California

Title: Re: B&M Shifter Cable 5-6ft long ?
Post by: dreracecar on September 23, 2014, 07:54:09 AM

Control Cables will make you a B&M style (mount tab & eyelet on one end and dbl nut adj on the other) any length you want. But getting a B&M one from Jegs or Summit might be easier with international shipping involved. Dont buy a used B&M cable , because of the single wire design,they wear out and the wire becomes sloppy and or sticky.

Title: Re: B&M Shifter Cable 5-6ft long ?
Post by: PSweeney on September 26, 2014, 06:53:25 AM

thanks guys, I can get one over here but it's almost $100 for what is essentially just a morse cable and I'm cheap !  I may well just use my 4ft one and connect it via a bellcrank / rod