FrontEngineDragsters.Org Forum
Classifieds (Please No Dealers) => Wanted to buy => Topic started by: opa1 on April 26, 2018, 08:06:29 PM
-
Looking for Hilborn 12AS-14AS 1/2-20 set of eight.
Timing cover, gear set and pump drive. SBC. Might also need a pump extension to clear balancer.
Also a good pump, Waterman 400, 80A-1/2
Have a set of 20AS that I dont need. Anything out there? Finding these parts or buying new will complete my fuel system.
-
Still needing a Hilborn timing cover. Any help in finding one appreciated. :)
-
Ordered a new Enderle cover.
-
Still looking for a set of 12AS or 14AS Hilborn nozzles. 1/2-20 up to 3.5 in length.
-
Alkydigger.com Mike sells his version of nozzles --they flow really tight as a group mine leak check dead on for the set
Under $200 a set get what you need He usually has used good pumps and Spud at FIE sponsor here may have used pump or will rebuild a flea market find reasonable but honest--a new pump while pricey will last forever if your cam end play and all else is correct
Good luck Get her running! I run 14's with an 80 1/2 enderle 355 CI 75 main pill have never changed the pill in years runs awesome BV leaks higher than others at 30% range with .002 on the blades with an idle bypass set up by Mike I can't even tell you what is in there--system has been trouble free runs in any weather
2 3/16ths Hilborn
-
That's close to how mine is set up now, except I have 20AS nozzles and a 80 pill. I talked to Mike last week. I guess he doesn't have his version of the nozzles anymore. He did have a used set of 16 for 150.00. I bought a new Waterman 400 pump.
-
Yea it is amazing how close is good enough LOL
Snag those used and rock on is what I would do or call Spud
Mike seems to have built that business on used but has moved on to be the biggest Hilborn, enderle guy around--he hit the wave just right
Make no mistake he ran great business's before he made that one--guy has a knack!! Have to hand it to him
-
I have a 400 Kinsler fuel pump for sale. It was flow tested by Spike @ Kinslers. Tag is with it. This was our Spare pump for our 380 cu-in SBC Sprint Engine [we no longer have] Asking 325.00 shipped to lower 48. Also have a recently serviced Permanet Magnet FIE Vertex magneto. With Blue Moroso Wires-Length set for SBC. Asking 450.00 Plus shipping charges. Thanks Al