Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - digster

Pages: [1] 2 3 ... 6
1
Matt Shaff's Engine Shop / Re: Zoomies vs collector headers
« on: May 07, 2022, 06:46:57 PM »
The Wife is going to know you've been up something when she gets a Zoomie flavored Cheese Burger! ;D

2
Wanted to sell / Re: Hemi cams
« on: April 28, 2022, 10:51:00 AM »
PM sent

4
Wanted to sell / Hilborn Nozzles
« on: April 11, 2018, 04:37:50 AM »
Set of 8 Hilborn AS 20 Nozzles. Good Cond.
$120 with free shipping cont. USA
701-740-0209

5
Wanted to sell / Re: All Aluminum SBC
« on: March 23, 2017, 12:12:15 PM »
Sold
Thanks for the add Glen

6
Wanted to sell / Re: 190" FED FOR SALE
« on: March 23, 2017, 12:10:37 PM »
Sold
Thanks for the add Glen.

7
Wanted to sell / All Aluminum SBC
« on: March 18, 2017, 05:46:52 PM »
Gaerte 410 SBC.  0 time since fresh.  3.8 inch stroke, 4.135 bore in Brodix aluminum block, Callies XL crank, std. std.  Rebuilt Dyers rods, new Dyers bolts, new16-1 JE pistons , custom Bullet roller cam, (lift .753 I  .727E @ 50  276I  283E), Crower EnduraMax roller lifters.  T&D rockers 1.65 I and 1.60 E ratios.  Fresh Brodix GB 2000 series 13.5 degree heads, 2.200 intake and 1.580 exhaust, with titanium valves.  These heads flow 400 cfm @ .700 lift.  Excellent 2.75 inch Kinsler injector with stacks. $10,000 701-740-0209 No Text
 
Kevin

8
Wanted to sell / Re: 190" FED FOR SALE
« on: March 10, 2017, 09:16:04 PM »
Bump

9
Wanted to buy / Re: WTB - ISO Non-Beadlock Wheels
« on: March 09, 2017, 06:12:29 AM »
I have a never run set of 5 on 5    14" wide 15" drag stars. also mounted on then is a set of 14.5 X 33.0 Goodyear tires. 
Call Kevin 701-740-0209

10
Wanted to sell / 190" FED FOR SALE
« on: January 28, 2017, 04:15:16 PM »
For  Sale
190 inch full body front engine dragster roller. Chrome molly chassis with 19 inch cage.  New front Hoosier tires on wire wheels. New rear Goodyear 31.0x12.0-15  D2585 tires.  New Pro Star 15x12 inch rims.  Power Glide Trans included.  New shiftnoid electric shifter.  Aluminum Engine plate 40 inches out.  Chrome plated “64” Olds. Rear.  4:10 gears and Strange axles with Willwood brakes.  Front spindles updated from chrome angliea to new Strange spindles.  Angeliea spindles are included with sale.  Wheelie bars and new Simpson Skyjacker chute. Chassis and body all with good powder coat.  7.50 Cert. expires this month will be sold with fresh cert.
$6,500.00 firm.

Dragster with NE2 427 SBC.  4 inch stroke 4.125 bore in Dart little m block, forged crank and rods, JE 15.5-1 pistons, Comp cams roller cam and lifters ( I .630-E .630 @ 50  I 268 E 270)  . 1.5 ratio Crower roller rockers.  Ported  Brodix-12 15 degree heads with titanium intake valves.  Hilborn  2  7/16 inch injector.  Waterman 500 pump.  26 passes on motor, good runner, dino sheets, 700 horse power at 6100 rpm, 658 ft lbs torque  @ 4700 rpm, vertex mag with internal coil.  Ran a best 1/4 mile time of 8.02 @ 160 mph.
$11,500.00 firm

Dragster with NE1 410 SBC.  0 time since fresh.  3.8 inch stroke, 4.135 bore in Brodix aluminum block, Callies XL crank, std. std.  Rebuilt Dyers rods, new Dyers bolts, new16-1 JE pistons , custom Bullet roller cam, (lift .753 I  .727E @ 50  276I  283E), Crower EnduraMax roller lifters.  T&D rockers 1.65 I and 1.60 E ratios.  Fresh Brodix GB 2000 series 13.5 degree heads, 2.200 intake and 1.580 exhaust, with titanium valves.  These heads flow 400 cfm @ .700 lift.  Excellent 2.75 inch Kinsler injector with stacks. Waterman 500 Fuel pump. MSD 12 amp mag and new box, new msd shift light and two step.  Finished the new engine build too late for 2016 season and not fired.  Either engine and roller package will come with an engine diaper, powder coated Zoomies  and 8 inch converter.   Did not dino after fresh but last dinoed 840 hp with smallish cam.  Have these dino sheets and build receipts.
16,500.00 firm
Take the roller with either engine and I will bundle a 2010 Newman enclosed dragster trailer, loaded parts racks and tie downs. 125 cc towing ATV, spare front and rear tires and rims, race tool box with tools, stands,  dragster dolly and fire suit.
for an additional $3,400.00.
Email kanderson8159@hotmail.com for more pictures, 701-740-0209

11
Front Engine Dragsters / Re: Chassis Paint
« on: August 01, 2016, 05:30:02 PM »
 My dragster is not blued but it's a good idea. I've blued allot of rifles. You won't get tanked hot blue results but Brownell's has several cold blues that can give satisfactory results.

12
Front Engine Dragsters / Re: Belt drive pump on carb engine.
« on: July 11, 2016, 04:18:42 AM »
 We ran a Aeromotive A2000 and a Bigs Alky carb for years on our 512 Chrysler wedges. Not a cheep pump but works great. I tried the multi small pump thing once and would stay away from that route.

13
Front Engine Dragsters / Re: Where do the old race Hemi engines go ?
« on: July 05, 2016, 03:58:43 AM »
 They are around. I see them come up for sale from time to time. One to two thousand depending on condition seems to be the going rate. Most have had the main saddle rebuilt and been windowed a time or two over the years. The hemi factor is very tempting for us old mopar guys but for most of us and the numbers you're talking its SBC.

14
Front Engine Dragsters / Re: Throttle cable trouble
« on: July 04, 2016, 01:45:58 PM »
 Thanks for the good info guys. Frank Parks was telling me about a cable he stocks. Not really woven and not really morse and very flexible. Probably the same brand.
 Do you have pictures for "what works" for pedal pull. I see some pull off the top of the pedal then loop beside your leg to the lower chassis tube then foreword to the front of engine and up to injector.
 Others hinge the pedal up a few inches and pull off the bottom of the pedal.

15
Front Engine Dragsters / Re: Throttle cable trouble
« on: July 04, 2016, 09:02:23 AM »
A picture of the old pedal with last attempt on Morse cable

Pages: [1] 2 3 ... 6