FrontEngineDragsters.Org Forum
Technical => Dan Dishon's Transmission Den => Topic started by: GlennLever on October 30, 2017, 08:38:14 PM
-
I made metal stuff for Christmas presents last year.
(https://www.lever-family-racing.com/wp-content/uploads/2016/12/DSC_1382-2.jpg)
If you had some broken, unusable transmission parts (gears and bearings), feel like donating them and are coming to the banquet I could find a good use for them.
Glenn
-
How do you keep the air cleaners from flopping around on the U-joint?
-
How do you keep the air cleaners from flopping around on the U-joint?
You can see the while project here.
https://www.lever-family-racing.com/my-metal-art/lamp-002-2016-12-21
(https://www.lever-family-racing.com/wp-content/uploads/2016/12/DSC_1363.jpg)
(https://www.lever-family-racing.com/wp-content/uploads/2016/12/DSC_1373.jpg)
(https://www.lever-family-racing.com/wp-content/uploads/2016/12/DSC_1377.jpg)
-
I will bring some things with me.
-
Thanks!
-
How do you keep the air cleaners from flopping around on the U-joint?
Easy, never grease them and run them out of phase :)
-
The u-joints are welded up