1
Front Engine Dragsters / Crowerglides
« on: February 10, 2020, 04:05:35 PM »
Hoping I can get a bit of assistance here-
I have a FED running a blown Injected 540bbc with 2 speed lenco
I have a Crowerglide clutch that seems to be wearing a lot more than I would expect, ie 15thou after two passes
I set it up with an airgap of 35thou and wound the nuts (holding the springs in ) one and a half turns.
Keen to get a better idea of what other guys are finding works for them
Thanks in advance
I have a FED running a blown Injected 540bbc with 2 speed lenco
I have a Crowerglide clutch that seems to be wearing a lot more than I would expect, ie 15thou after two passes
I set it up with an airgap of 35thou and wound the nuts (holding the springs in ) one and a half turns.
Keen to get a better idea of what other guys are finding works for them
Thanks in advance