Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dusterdave173

Pages: 1 ... 40 41 [42] 43
616
Roo Man's Room / Re: How do i know the cage will fit my size?
« on: June 17, 2014, 03:40:03 PM »
Opinions are OK--and expert opinions are good too but...I thought when I found this forum that is would be to get all folks interested in and fond of FED's together and have a place to promote the love , racing, and enjoyment of FED's. Front engine dragsters and any type of Nostalgia racing is the only thing growing in our drag race world--it is growing leaps and bounds judging by the Bowling Green HRR this past wk end and the many other shows I have attended or read about in the last year or two. So it is disturbing that a few folks on here bash other builders --oh lets just say John Worm. Come on..no one has died in one because of some awful failing flaw---unlike Chevys as of late...No they are not near the car like others done by experienced custom builders that have devoted their entire lives to create--but...decent entry level machine that can be finished a little at a time and wind up getting more folks in our camp--Heck Yes!!! Do some turn out poor quality because of home builder inexperience and general lack of skill--sure--like all kit type deals--just look at Cobra kits--they sell 40 times more kits than are ever made road worthy and some are pure t dangerous from lack of builder skill, but others are fantastic fun machines--so to, the Worm cars.
Not bragging but mine has turned out pretty darn well and I feel like if you saw it up close you would think I did a fine job of building--As to some of the "problems" outlined by others ( with all due respect) I would say--yeo the seat area is big at the bottom--lets All kinds of buyers fit ( except Sasquatch size) and a simple soloution is a seat foam form AKA Bead seat kit will do nicely to make my car safe and comfortable for my size butt and back. The weight issue is only apparent to guys that really RACE and are born weight  aware about every detail--Guys like me that will club race / match race/ and as you all know really know, just exhibition race couldn't give a poop about 50 lbs one way or the other--Burn alky and rubber and make us all smile is the real idea here not the Maximum effort or a serious hard core to the bone racer--which I was for 25 years --now I just want to have fun and not work at it so hard--I don't care if I go 8.00 or 9.00--could care less so weight? Big deal!
I could go on but in the words of Rodney King--Can't we all just get along??? Bashing Johns cars on the web and hurting the value of cars that many have instead of saying--yea it ain't a NHRA Jewel but I see how we can have more folks to play with--is not in the spirit of growing our beloved sport and if it does not do some growing you guys that are the experts will not have any new customers to build for.

617
Wanted to sell / Re: Zoomies-SBC Roller Cam--Frameworks Shifters-Misc
« on: June 15, 2014, 03:51:30 PM »
Black shifter sold Thanks
Nothing the matter with silver one

618
Wanted to sell / Zoomies-SBC Roller Cam--Frameworks Shifters-Misc
« on: June 15, 2014, 07:39:54 AM »
New SBC Zoomies 1 3/4 in $150--Weiand SBC timing cover $70--Frameworks dragster shifters Black rear exit $175-can be converted to frt exit  Silver Frameworks shifter frt or rear exit $100--sbc solid roller Comp approx 260 range 050 630 ish lift $100--New Howe pedal $20   all plus actual shipping  jdk@ctc.net or phone 704 244 6649 Thanks

619
Roo Man's Room / Re: How do i know the cage will fit my size?
« on: June 13, 2014, 03:46:07 AM »
Gasserx
I guess you are overseas--I inspect cars all the time for my Norway pals--you Must have any car inspected before purchase--I can do it for you just email me jdk@ctc.net  I have a network of good guys nationwide if I can't get to it
Again , it is a MUST or you will get robbed
Glad to help
David in North Carolina

620
Roo Man's Room / Re: How do i know the cage will fit my size?
« on: June 12, 2014, 02:28:17 PM »
I am 5 ft 11 230 and fit easy breezy  Get it they are great way to start--just finished mine and love it!

621
Front Engine Dragsters / Finished my Dragster Today!!!!!!!!!!
« on: June 12, 2014, 02:12:11 PM »
Well...you all know they are never finished but..28 months after bringing the pipe home it is track ready less paint is all...sounds mean--runs sweet--ready to go test!!
WHEW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

622
Front Engine Dragsters / Re: coupler question
« on: May 30, 2014, 03:11:39 PM »
All the top fuel teams used to and maybe still use Krytox grease--crazy expensive made for the space shuttle or some such--stupid expensive but...my top fuel crew pal said the stuff Really Works for no wear in coupler
again--when you look up the price you will shudder!
I used a tad of anti seize on mine --not too much or it will sling it all over everything

623
Gaining on it!

624
Dropped the engine and tranny in my new build ---getting closer

625
Front Engine Dragsters / Re: fed bodys
« on: April 28, 2014, 07:36:09 PM »
I built my first one --I am sure my next one will be better but ...
I have zero experience doing any body work but just went at it and heres how it turned out.

626
Front Engine Dragsters / Re: Tread front tires
« on: April 27, 2014, 12:42:18 PM »
S&W Racecars in PA has the Kenda tires usually found on most new builds for $35 a whack--best price on the planet--everyone else is near $90 a tire  they also have good tubes cheap.

627
Front Engine Dragsters / Re: Oil pumps for SBC
« on: April 23, 2014, 05:56:24 PM »
FWIW
Most lifter mfg's say no restrictors
The bushed wheel lifters should Never have any oil restrictors per Mr John Callies
maker of Morels ( he invented those)

628
I mounted my home made body and finished engine pan --I am ready for paint now.

629
Wow! A five feet tall SBC!! Looking good man!

630
Front Engine Dragsters / New Body Almost Finished!
« on: April 05, 2014, 02:22:05 PM »
Whew!!!! I have learned one thing---get a body man next time--I started with flat sheet and made it this far--I am very clsoe to painting the chassis and then...it will be like decorating a Christmas tree--just hang all the goodies on--all my componants are done--just need a few control cables, new belts and she will be a running FED--28 months in --No Stopping now!!!

Pages: 1 ... 40 41 [42] 43