Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - crider

Pages: [1] 2 3 ... 14
Wanted to buy / 9.3 Pontiac disc brakes
« on: November 17, 2021, 03:56:55 PM »
Looking to buy a disc brake setup for a 9.3 Olds Pontiac rear end anybody have anything?

Spud Miller's Cave / Re: fuel pump drive belt ?
« on: September 16, 2021, 03:06:50 PM »
This was a while back. I got the belt figured out and ran the injection only to find my little eelco tank to be way too small for alky. I need to find someone in this heneral area to fabricate a fuel tank for my car so I can get the injection back on there.

You stick the copper wire between the rod and camshaft to make sure there is enough clearance

Events / Re: North Wilkesboro nostalgia drags
« on: July 18, 2021, 03:43:27 AM »
I messaged them last night and was told it was just going to be a Chicago style deal for the fuel cars plus the regular bracket race. No other nostalgia racing

Dan Dishon's Transmission Den / Re: Powerglide or 3-speed?
« on: May 03, 2021, 04:34:44 PM »
I agree with low HP and the very mild 3.23 gear a 3 speed transmission would be a help, I'd leave that 200 alone. Parts for it going to be pretty pricy to do any upgrades. I'd just grab a TH350. The savings on parts will likely more than offset the difference in the cost of the core transmission

Front Engine Dragsters / Re: Potential FED Build
« on: April 26, 2021, 04:54:51 PM »
There's quite a few of us that use moped tires on the front

Roo Man's Room / Re: Building New FED 170" Need a little help
« on: March 25, 2021, 11:27:20 AM »
My rear plate is attached to the lower rails. Simple tab with a nut and bolt

Wanted to buy / Re: Clutch turbo wanted
« on: January 02, 2021, 03:11:29 PM »
Found one!

Wanted to buy / Re: Clutch turbo wanted
« on: December 26, 2020, 01:38:00 PM »
Thanks! I'll take any help I can get

Wanted to buy / Re: Clutch turbo wanted
« on: December 24, 2020, 09:31:25 AM »
Thanks Gordon, I already talked to Dynamic, and some other place that used to sell the kits and they both said they are out of the clutch auto business

Wanted to buy / Clutch turbo wanted
« on: December 23, 2020, 05:36:31 PM »
Anybody still have a clutch turbo transmission laying around? I'd like to try one in a gasser project. Or even the parts to build one

Front Engine Dragsters / Re: Back to the track
« on: November 15, 2020, 04:31:07 AM »
Sat. the 5th will be more or less a test and tune day. I think Sun. will be an actual race. I haven't ran mine since I added a vacuum pump setup on it, so I'm just curious as to if it picks it up any at all. Plus it is about the last chance to get out and play locally until spring.

Front Engine Dragsters / Re: Back to the track
« on: November 13, 2020, 03:31:55 AM »
Good to hear you've got it sorted out! Are you planning to come to Farmington swap meet race? I'll be bringing mine as long as the forcast is dry that weekend

Wanted to buy / Re: WTB side mount Shifter for 2 spd powerglide
« on: August 17, 2020, 11:29:59 AM »
I think Duster Dave has one for sale

Your Builds / Photo Gallery / Re: 175'' build
« on: July 22, 2020, 03:10:37 AM »
David built my chassis as well, he did very nice work, but I'm not sure he is in the business anymore.

Pages: [1] 2 3 ... 14