FrontEngineDragsters.Org Forum

Technical => Spud Miller's Cave => Topic started by: wideopen231 on August 21, 2015, 04:09:02 PM

Title: how much pump for 75% plus
Post by: wideopen231 on August 21, 2015, 04:09:02 PM

Spud'

   Wonder how big of pump I would need if want to run 75%  or more.Engine is 496 Hemi TFX,BAE heads,KB crank  all parts are from my alky setup.12.5 with .040 gasket,but have cpl .090 that can use to drop compression some . Injector is enderle bird with K style BV om sheetmetal tunnel ram.Looking for fun setup to run some.
   Thinking I can leave in high gear if needed and changing rear  gears is easy enough,4.11 at present. If needed I have mag 44 I can throw on car. If can setup to run 100% I have no problem with that.I have a good 1100 pump sitting on shelf also if that can be made to work.Not concerned about it rule limits for this deal at moment,more of make good show and not kill to many parts.