Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - DON

Pages: [1]
1
Your Builds / Photo Gallery / Re: Glenn's dragster thread
« on: April 12, 2018, 06:56:54 AM »
Glen,couldn't you have used split shaft collars  and not cut shaft ?
      DON

2
Drag Racing / Re: HRR 2017
« on: June 23, 2017, 11:50:30 AM »
Glenn,I can mic that up for you if you choose .I have all the proper tools to get the best accuracy .Let me know when and what you want to do.
    Don

3
Front Engine Dragsters / Re: FEDs on trailers
« on: August 20, 2014, 05:57:45 AM »
It is recommended that the tongue weight be at least 10-15% of total weight .So get out a scale to remove any doubt .

4
Altereds / Re: Front end shake
« on: July 20, 2014, 04:36:53 PM »
Had same problem with front end wobble on my altered after one piece opel body was replaced with light
t - body. Made many adjustments . Only solution was to add steering damper . I bought S&W unit which is adjustable . Other units out there ,street rod  or volkswagan .Talked to other altered guys who have added them with same severe wobble . That convivced me to buy it .

5
Drag Racing / Re: Roll Call Who is going to Beach Bend?
« on: June 13, 2014, 05:56:06 PM »
Hey Glen , Great first round win on friday night .Caught you on bangshift .Keep it going on sat. I'll try to watch as long as they give a good feed .
   Don

6
Matt Shaff's Engine Shop / Re: Pulled threads on #3 main
« on: May 07, 2014, 04:21:15 PM »
Old racer back in the 70's recommended using shaving cream in head water passages to prevent anything in head from falling into cyl. on install . Been using it since .

7
Roo Man's Room / Re: Best radiator
« on: April 16, 2014, 09:03:34 AM »
What year Civic would that be from ?  What overall dimensions for it ?

8
Roo Man's Room / Re: starter and mag switch
« on: December 17, 2013, 06:21:18 AM »
Sorry DRE ,That was Coker's shifter that I want to know about.

9
Roo Man's Room / Re: starter and mag switch
« on: December 16, 2013, 12:23:43 PM »
DRE ,what brand of shifter are you using with the solinoid mounted underneath?I can't read the brand from the pic . Thanks Don

10
Altereds / Re: Old 70s funny car turned alterd
« on: November 21, 2013, 05:38:12 AM »
Wayne,Any Pics new or old .

11
Altereds / Re: Resurrected altered
« on: October 22, 2013, 10:04:29 AM »
Have contacted  Scott at S&W and he told me that the chassis should cert.as is, but the diagonal diameters are under size. So I don't think he know .

12
Altereds / Re: Resurrected altered
« on: October 22, 2013, 08:37:40 AM »
Thanks Pallidin, The list confirms that my altered was built by S&W which I already knew.Now I can prove to a friend that his altered was also built by S&W .I know that my car was built in 1973 with an Opel GT body with a 96" WB. I still have the body but have moth balled that for a T bucket ,makes it a one man operation at the track.Is there any way to find out what the tubing specs were for those early years ?I know mine will not cert because fo a couple of diagonals and  uprights . 

13
Altereds / Re: Resurrected altered
« on: October 20, 2013, 05:50:03 AM »
I have a early 70's altered .what can be learned from the tag that is welded to the chassis ?

Pages: [1]