Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Candy-Man

Pages: [1] 2
1
Got carried away on the zero's :)

2
Wanted to sell / 392 Hemi's (X2), Halibrand Dragster Spindle Mount Rims
« on: September 11, 2017, 02:29:50 PM »
For Sale:

1) Two 1958 "392 Hemi's" . Motors are apart. Price includes: Block, Heads, Rockers & Crank. Other pieces for sale as well.... $2,000 each, FIRM....

2) Hedman Dragster 2" tubes for 392 hemi, zoomie hedders, silver ceramic coated, new $1,100 US... Selling for $700...

3) One piece Fiberglass race 'T' bucket with turtle deck (trunk), weights 30 lbs, $600....

4) 3 pairs of 392 bare heads, $175 per pair....

5) Milodon 392 hemi gear drive, new, $300....

6) Chrome moly wheelie bars, powder coated flat black, with adjuster coil springs, new never used, $375.....

7)  Enderle Barn Door Blower Injector, with scoop and stainless steel lines, highly polished mirror like, $1,200 FIRM....

8) Two sets of Halibrand, magnesium spindle mount, funny car rims, mint condition, $1,200 pair....

9) Accel Pro hemi race wires, $100 pair....

10) Moon 4 quart puke tank with breather and cast brackets, new, $300

11) 392 hemi 'nitro / fuel' roller cam, roller rockers and springs, new, $600...



Contact : neilcandy@xplornet.ca or call # (613) 353-7572

Parts located 3 hours north of Syracuse NY...

3
Wanted to sell / Donovan Hemi Stands, Rockers, etc
« on: March 24, 2014, 04:54:31 PM »
Chrysler Hemi, complete set of Donovan Stands, Rockers, Solid Shafts, etc.

Pictures show it all on a Nitro Burning 392.

$1,300.00

Thanks, Neil...

4
Gassers / '40 Willys P/U Box Measurements
« on: March 01, 2014, 06:32:07 AM »
Hello :  I will be starting my '40 Willys Truck build this summer and I am looking for a few general measurments for the box which I will be building.  What is the general heigth of the box, assuming the bottom of the box does not extend past the bottom of the frame rail ?   Second, what angle where the gun rails bent and the width of the gun rail ?

I was thinking 21" tall box, including the gun rails would look just fine !   The motor will be a 409 !

Thanks...

5
Wanted to buy / 392 Magneto For AA/FA
« on: February 28, 2014, 10:51:04 PM »
Wanted :  392 Magneto for a AA/FA...

Thx....

6
Wanted to buy / Re: LENCO CS2 Rear Mount Shifter
« on: March 21, 2013, 10:33:13 AM »
Hello Glenn :  Keith doesn't have any shifters at the moment, however; who is "Matt" ?

Thx, Neil...

7
Wanted to buy / Re: Lenco OR B&J 2 Speed With Reverse
« on: March 20, 2013, 11:21:19 AM »
Perfect...  Thx for the tip as I jsut received my Lenco....

8
Wanted to buy / Re: front cover and blower manifld for 303 olds
« on: March 20, 2013, 11:20:33 AM »
Tony at Ross Racing Engines may have what you are looking for....  He is an Olds Guru....

9
Wanted to buy / Re: fiat body
« on: March 20, 2013, 11:18:08 AM »
Fiberglass Race Weight Body ?

Here is agreat guy in Ohio...  MyBonneville Belly Tank, Surfer Scoops and "T" Body was made by Scott...

Tell him I sent you if you are interested....

10
Wanted to buy / LENCO CS2 Rear Mount Shifter
« on: March 20, 2013, 11:13:56 AM »
Wondering who may have a rear mounted manual shifter for a CS2, 2 speed with reverser ?

Thx, Neil...

11
Roo Man's Room / Re: AA/FA : Fuel Altered Axle With Coil Overs
« on: March 20, 2013, 11:11:57 AM »
Hello Keith :  You there Buddy ?

Just wondering what your suggestion may be on the alxe and front coilovers?

Going to the Round-Up in a couple of weeks ?

12
Roo Man's Room / AA/FA : Fuel Altered Axle With Coil Overs
« on: February 14, 2013, 05:22:26 AM »
What coil overs (Shock Length & Spring Rate) are the AA/FA altereds running on their front axles ?   I understand the front ends are near solid, with very limited suspension.  THx....

13
Wanted to buy / Re: WANTED: FED Front Spoke Wheels
« on: February 11, 2013, 06:36:52 PM »
A buddy of mine will be heading down to Wellington TX then Austin the first week in April for the Lone Star Round-Up.   If you are interested, he has a nice pair with Chev spindles, tires & bearings.  Give Jeff at call at (519) 942-8157... I know he will be selling his wires, however; they are in nice shape and I noticed you are located in Texas..... Just a thought...

14
Roo Man's Room / Lenco CS1 or CS2 Transmission For A "AA/FA"
« on: February 08, 2013, 06:02:17 AM »
2 Spd, 19% underdriven CS2 Lenco for a  AA/FA ?    Or should I go for the CS1 ?

15
Altereds / Re: A few pics of my mentors ride from the 60'S
« on: February 05, 2013, 07:43:04 PM »
Looks as if most Nitro tanks back then were around 5 Gal ?

I call the Halibrand rims on the front of the Winged Express, "Funny Car Rims", however; what were these rims called ?   I am not referring to the 12 spoke rims they ran for a short period of time.....

Kool 2nd Dad !!!

Pages: [1] 2