FrontEngineDragsters.Org Forum
Classifieds (Please No Dealers) => Wanted to sell => Topic started by: lake_harley on November 26, 2023, 02:37:47 PM
-
New dragster axle for aftermarket spindles. After I bought this axle I found out the kingpin bosses were too long for my original Anglia spindles. Center-to center kingpin width is 44". Drop is 4.5" measured from the top of the kingpin boss to top of axle tube center portion. Kingpin inclination as best as I can tell using a digital level is 8 degrees.
Location is Southeast Missouri. Price is $225 plus actual shipping.
Photos available via text. (573) 286-3335
Lynn Winter
-
I had a request for a bit more info so thought I'd add it. The axle tube is 1.5" Wall thickness unknown but I would expect 3/16" (.188"). Kingpin bosses are 2" tall and the kingpin hole according to my dial caliper is 11/16" (.688")
Lynn
-
SOLD