FrontEngineDragsters.Org Forum

Classifieds (Please No Dealers) => Wanted to buy => Topic started by: opa1 on April 26, 2018, 08:06:29 PM

Title: Hilborn Nozzles/Drives
Post by: opa1 on April 26, 2018, 08:06:29 PM
Looking for Hilborn 12AS-14AS 1/2-20 set of eight.
Timing cover, gear set and pump drive. SBC. Might also need a pump extension to clear balancer.
Also a good pump, Waterman 400, 80A-1/2

Have a set of 20AS that I dont need. Anything out there? Finding these parts or buying new will complete my fuel system.
Title: Re: Hilborn Nozzles/Drives
Post by: opa1 on May 23, 2018, 05:22:09 PM
Still needing a Hilborn timing cover. Any help in finding one appreciated. :)
Title: Re: Hilborn Nozzles/Drives
Post by: opa1 on June 11, 2018, 10:06:45 AM
Ordered a new Enderle cover.
Title: Re: Hilborn Nozzles/Drives
Post by: opa1 on August 16, 2018, 12:10:35 PM
Still looking for a set of 12AS or 14AS Hilborn nozzles. 1/2-20 up to 3.5 in length.
Title: Re: Hilborn Nozzles/Drives
Post by: dusterdave173 on August 16, 2018, 03:19:24 PM
Alkydigger.com  Mike sells his version of nozzles --they flow really tight as a group mine leak check dead on for the set
Under  $200 a set get what you need  He usually has used good pumps and Spud at FIE sponsor here may have used pump or will rebuild a flea market find reasonable but honest--a new pump while pricey will last forever if your cam end play and all else is correct
Good luck Get her running! I run 14's with an 80 1/2  enderle 355 CI 75 main pill  have never changed the pill in years runs awesome  BV leaks higher than others at 30% range with .002 on the blades with an idle bypass set up by Mike I can't even tell you what is in there--system has been trouble free runs in any weather
2 3/16ths Hilborn
Title: Re: Hilborn Nozzles/Drives
Post by: opa1 on August 16, 2018, 04:29:51 PM
That's close to how mine is set up now, except I have 20AS nozzles and a 80 pill. I talked to Mike last week. I guess he doesn't have his version of the nozzles anymore. He did have a used set of 16 for 150.00. I bought a new Waterman 400 pump. 
Title: Re: Hilborn Nozzles/Drives
Post by: dusterdave173 on August 16, 2018, 07:09:27 PM
Yea it is amazing how close is good enough LOL
Snag those used and rock on is what I would do or call Spud
Mike seems to have built that business on used but has moved on to be the biggest Hilborn, enderle guy around--he hit the wave just right
Make no mistake he ran great business's before he made that one--guy has a knack!! Have to hand it to him
Title: For Sale Kinsler 400 pump and FIE Vertex Magneto
Post by: alkyal on April 21, 2019, 02:21:46 PM
I have a 400 Kinsler  fuel pump for sale. It was flow tested by Spike @ Kinslers. Tag is with it. This was our Spare pump for our 380 cu-in SBC Sprint Engine [we no longer have] Asking 325.00 shipped to lower 48. Also have a recently serviced Permanet Magnet FIE Vertex magneto. With Blue Moroso Wires-Length set for SBC. Asking 450.00 Plus shipping charges. Thanks Al