FrontEngineDragsters.Org Forum

Drag Racing Discussions => Gassers => Topic started by: artificer64 on November 17, 2016, 09:47:46 PM

Title: Introduction
Post by: artificer64 on November 17, 2016, 09:47:46 PM
     Hello, I'm new to this site. Wow it has a lot of good information. I am looking forward to learning.
I have a 55 chevy I run with the Gassah Guys at Winterport Dragway in Maine. My best is 6.86 @101.15  BBC , Muncie 4 speed.
Title: Re: Introduction
Post by: GlennLever on November 18, 2016, 06:49:18 AM
Welcome to the forum
Title: Re: Introduction
Post by: jeff/21 on November 18, 2016, 04:28:05 PM
hello do you have any pics and specs
jeff
Title: Re: Introduction
Post by: artificer64 on November 21, 2016, 09:49:45 PM
Thank you.  I'm lucky to have fellow racers updating their cars, so I buy their used parts .
Not having tons of money in my car makes it more fun to me. Not having luck posting pictures, but I'll get it soon.

Specs:  used BBC 454 stock block + .06 , used stock cast crank
used ls6 pistons, new procomp rods, used comp cams roller 680/680, used crower lifters
new brodix bb-2 plus rectangle heads. used dart open plenum intake
used 850 holley, new strange 4.86 gears w/ full spool, new hoosier 29 9 15 slicks
new MSD ignition 6400 rev limit , rebuilt Muncie m20 trans w/ used hurst vgate shifter.
Title: Re: Introduction
Post by: GlennLever on November 22, 2016, 07:48:39 AM
 How to post pictures (http://www.frontenginedragsters.org/forum/index.php/topic,559.msg3359.html#msg3359)

If you want send me a couple and I will add them to your post for you.

Glenn
Title: Re: Introduction
Post by: artificer64 on November 30, 2016, 08:37:29 AM
trying for pictures
Title: Re: Introduction
Post by: artificer64 on November 30, 2016, 08:49:40 AM
again
Title: Re: Introduction
Post by: ricardo1967 on November 30, 2016, 09:38:15 AM
Nice ride! Welcome to the forum artificer64.
Title: Re: Introduction
Post by: jeff/21 on November 30, 2016, 04:31:05 PM
Do you have a roll bar or are they nor required?
Title: Re: Introduction
Post by: artificer64 on November 30, 2016, 08:51:24 PM
Thank you.  Rollbars are required after certain ets. My car is updated a lot from these pictures, I'm trying to find some to post.