Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - 23T Hemmee

Pages: [1]
1
Altereds / Merry Christmas
« on: December 11, 2017, 09:36:43 PM »
On the first day of Christmas my true love gave to me, a blown alky Twenty-Three Tee......*.

* On the second day of Christmas my true love gave to me.......two Hemi-heads and a blown alky Twenty-Three Tee*

*On the third day of Christmas my true love gave to me.....a three axle trailer, two Hemi-heads and a blown alky 23-T

*On the fourth day of Christmas my true love gave to me......four pairs of pistons, three axle trailer, two Hemi-heads and a blown alky 23-T *

On the fifth day of Christmas, my true love gave to me CHROME MOLY RINGS!!!!!
 Four pairs of pistons, three axle trailer, two Hemi-heads and a blown ' alky ' Twenty Three teeeeeeee!

                                                       

2
Wanted to sell / Hilborn 175-2 Pumps
« on: November 09, 2017, 01:28:24 PM »
2 each Hilborn 175-2 pumps-flow tested and tagged at Kinsler

Pump#1 flows at 2000 rpm pump speed:

2430 @15#
2350 @ 50#
2250 @ 90#
2220 @ 100#

$365 free shipping to lower 48
===========
Pump #2 flows at 2000 pump speed

2400 @ 15#
2275 @ 50#
2150 @ 90#
2125 @ 100#

$350 free shipping to lower 48
Paypall or MO, PM me here, Thanks

3
Wanted to sell / HIlborn and Kinsler Nozzles II
« on: February 15, 2017, 02:28:50 PM »
8 Hilborn 8A Deflector tip nozzles-been a while  but think they were for up to 430" injected gas combo.

Not sure if Hilborn or Kinsler 16A deflector tip nozzles- used on 426" Blown gas Hemi.

Been 25 years since I used any of these so memories a little fuzzy about usages.
Might want to contact Hilborn and Kinsler with numbers to make sure.
$40 per set plus shipping.  Paypal or MO, PM me here, thanks.

4
Wanted to sell / HIlborn and Kinsler Nozzles
« on: February 15, 2017, 02:08:58 PM »
8 Kinsler 47A deflector tip nozzles - were hat nozzles for blown alky 417" hemi.

8 Kinsler 760 Flow code nozzles- I used these on a 512" alky Tunnel-Ram wedge head Mopar

$40 per set plus shipping. Paypal or MO, PM me here.

5
Wanted to sell / KB 1" Stroker
« on: April 20, 2016, 10:18:02 AM »
Keith Black 4.750" Stroker crank-Last run as Injected Alky 608" 11.220" Tall Deck in Front Engine Dragster 7.22@192+. Mains are 2.746-2.7465" and rods are 2.3725-2.373". Don't know bob-weight, bought as a complete assembly, but probably 2750-2800. Not a trick Bryant or Winberg but a good solid crank. Could stand a polishing, pulled the assembly out to use block for a blower build, been sitting since. Have BME-JE 7.505" rods and 4.510" 1.35CH pistons but only know the history for the two years we ran them. You would have to have a tall-deck to run them, although they could actually work in a big-bore standard block with a 3.750" crank, give you a 479" but rod/stroke ratio would be in the ozone, 2-1 I think. Never know, somebody out there might be crazy enough to try it. Anyway, crank needs a new home, just sitting in the shop collecting dust. **NEW PRICE** $1200.00 shipped to lower 48. MO or Paypal, PM me here, Thanks.

6
Roo Man's Room / Aircraft tubing
« on: January 14, 2016, 05:02:20 PM »
Hey Roo,

Need to know how aircraft tubing is sized.  My wing struts appear to be about 1.375" at the wide side and .375" on the narrow.  Will the next size up be a close enough fit to let the smaller size telescope with a fairly snug fit or is there too much of a gap in the two sizes.  I'm trying to utilize part of my existing wing strut but need to extend the length about 10 inches to remount the strut off the back of the shoulder hoop uprights to satisfy the new f!@$^% wing rule.  Off topic, you still interested in the dual filter mount?  Didn't want to repost the ad if you were.
Thanks,

7
Wanted to sell / Dual Oil Filter Base & Mount
« on: January 21, 2015, 10:34:07 AM »
Dual oil filter base - Mopar style filters - $40 + shipping. MO or Paypal - PM Me Here

Chrome Moly Tube chassis mount for above filter base - $30 + shipping - PM Me here. Package deal on both - $60 + ship. MO or paypal.


8
Altereds / The "Highs and Lows" of drag racing.....lol
« on: August 28, 2013, 10:34:29 AM »
Got my first #1 qualifier in the 7.00 Pro class at the NDRL AlkyDigger.com Hot August Nights at Edgewater Sports Park in Cleves, Ohio, last Saturday.  Couple that with my first round loss after leading by .007 at the 1000' mark only to give it away in the last 100.'  They say there are 1,000 ways to lose a race....I now know 961 of them.....  :-[  :-[  :-[




9
Spud Miller's Cave / Proper grounding for SM-IV
« on: June 21, 2013, 07:20:59 AM »
Hi Spud,
I know this is basic but just want to make sure.  Been running a SM3 grounded to an oil pan stud on KB block with big red button kill switch.  Recently bought someones spare SM-4 that you hopped up in 2008 with the big yellow capacitor on the outside.  Since changing over, it seems the mag tries to fire sporadically with the switch off.  Pulled the switch to see if contacts looked bad and they looked brand new, no evidence of arcing anywhere so I don't think the switch is bad.  I see on the notes, at the bottom of the paperwork that you hand wrote to ground both heads to the coil, am assuming these grounds go to the yellow wire side of the coil, but just want to make double sure.  I ran a Vertex for years because it only had 1 wire and even I could figure that one out.......lol. Thanks!!
BTW using 2-wire harness and 28900A redtop if that makes any difference.

10
Wanted to sell / Impact 3.3/20 F/C Overboots
« on: May 02, 2013, 10:13:39 AM »
Used very little, do not have to be re-certified. They're size Large.  Sell new for $249, will sell for $135 plus shipping to lower 48. PM me here, Thanks!


11
Wanted to sell / Taylor Motorsports 7.1 Hemi Diaper
« on: April 11, 2013, 10:12:32 AM »
Taylor Motorsports 7.1 Kevlar Hemi Engine Diaper-Fits F/C style full length pan with pocket for KB,P&P style oil pump-Altered or dragster style chassis or probably tube chassis door car, too. They're $925 new, just came back with fresh 7.1 cert, $400+ shipping. PM me here, Thanks


Pages: [1]