Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - dusterdave173

Pages: [1] 2 3 ... 9
1
Wanted to sell / COMP 16 IN PRO DEGREE WHEEL with pointer and socket
« on: March 22, 2024, 08:28:42 AM »
Nice used Comp 4791 degree wheel with assec's and the socket New this is over $400 with the socket--get this well experienced winner builder for $200 comes with rigid pointer another $50 value
ship for $15 to lower 48  email dusterdave173@gmail.com or phone 7042446649

2
Cleaning out the drawers
two sets ARP Chevy converter bolts  one long set one regular set 7/16th ,  and two new T Bolt clamps for engine or trans mounts on dragster  all for 30.00 shipped FREE   dusterdave173@gmail.com  or 704 244 6649 eastern

3
Wanted to sell / BRONZE DISTRIBUTOR OR MAG GEAR SBC OR BBC LOOK!
« on: January 26, 2024, 09:57:48 AM »
Cleaning out spares--This is a USA Made REED brand real American bronze drive gear in EX COND used Very little
Don't buy China junk--here is a good one almost no wear--These were always the best available --no longer made
$25 ships free   call me 704 244 6649 Thanks    always good to have a spare--worn gears have ruined many a race day

4
out of Print hard to get
Slingshot Spectaculars is FULL of great history and lots of pics
Same with the other--
Both books $30 shipped  calls are best Thanks David 704 244 6649

5
Front Engine Dragsters / REPO FRAMEWORKS SHIFTERS ON EBAY
« on: November 22, 2021, 10:34:24 AM »
I thought about it --reproducing the wonderful Frameworks Shifter--the Best for a FED  but was told B&M had the patent etc and just did not think it was worth a legal tangle but someone is now making them again--They are on Ebay under powerglide race shifter Hot Shifter for $300  anyone building a car --this is great news--there are just no more used ones around --I urge anybody needing a shifter to check it out

6
Wanted to sell / FLEX PLATE , CONVERTER BOLTS, BRONZE GEAR ETC
« on: June 21, 2021, 08:11:58 AM »
cleaning up
I have two sets ARP flexplate to crank bolts new, one set converter to flex plate bolts ARP 7/16ths, one 39ths set and one Nice REED brand USA made bronze distributor/magneto gear  It is in ex cond--used but almost zero wear--these are old school USA made not china junk  and......ARP oil pump stud kit  new in package
Entire lot $50 shipped free  please email dusterdave173@gmail.com   Thanks

7
Wanted to sell / FRAMEWORKS POWERGLIDE SHIFTER--RARE!
« on: April 02, 2021, 08:50:20 AM »
 Guys I found another of the greatest shifters ever for an FED, RED, or Altered--Frameworks all aluminum the thinnest lightest ever I can't list pix on here so call me 704 244 6649 and I will email photos--$375 shipped--It is listed on the Facebook FED group page--grab it while you can these always sell fast--They are simply the best! Not made in decades
704 244 6649 Thanks David

8
I have a Perfect--deburred, cleaned , blasted, 727 main case--This was a spare for a dragster I had--case is drilled for vent, drilled for easy install of a bolt in sprag ( a 727 must have), but the Beauty is starter pocket narrowed--this helps the 727 fit between the rails easy on a front or rear engine dragster  this case is mint and ready to build
I don't need it anymore a steal at $100 plus actual UPS call me 704 244 6649 or email for better pix dusterdave173@gmail.com

9
Wanted to sell / RARE FRAMEWORKS PG SHIFTER --FOUND ANOTHER ONE
« on: October 05, 2020, 12:47:53 PM »
OK I scored another in ex cond This is crazy rare rear exit cable type
I have trouble listing photos here look at the other ads I had for photos
or email for pictures of this one $375 plus 418 priority mail Hurry last one lasted ten minutes!
These are the BEST lightest, slimmest, strongest best shifters for FED ever made--Not made in decades now--
call 704 244 6649

10
Wanted to sell / RARE! FRAMEWORKS POWERGLIDE SHIFTER--THE BEST!
« on: September 25, 2020, 09:04:39 AM »
RARE!!!   These have not been made for decades now--very rare--these are the BEST, lightest, thin, rock solid, no plastic--so thin you can mount in an FED better than any other--best shifting unit ever made--crazy hard to locate
I have found another one --with nice cable--ex cond--$375 plus shipping  call me 704 244 6649 or email for better photos Thanks David

11
Wanted to sell / RARE FRAMEWORKS PG SHIFTER --FOUND ANOTHER ONE
« on: July 22, 2020, 01:06:59 PM »
can't ever put pix on here just email for lots of pix     dusterdave173@gmail.com
I have found another beautiful little used shifter--these are the lightest and slimest--best working FED shifters ever made --not built for decades now they are very RARE! call or email  704 244 6649  will not last long! $375 plus shipping

12
Wanted to sell / MISC SMALL PARTS--LOOK!!
« on: May 12, 2020, 07:45:30 AM »
I am cleaning off the shelves here is one "LOT" of very useful spares

ARP 7/16ths converter bolt set Chevy
ARP 3/8ths converter bolt set
ARP oil pump stud chevy
ARP flexplate bolt kit Chevy
set 5/8ths wheel washer spacers
quick turn weld on plates
near new Joes 0-15 air gauge--glow in dark
Melling oil pump pressure spring kit
PG shifter lever
RARE hard to find when you need one PG tube goes between valve body and trans
neat adjustable throttle pedal stop clamps to frame

everything $60 shipped free Paypal OK you eat the fees
dusterdave173@gmail.com  704 244 6649
Thanks

13
Front Engine Dragsters / Since I sold my FED Look
« on: February 19, 2020, 02:40:24 PM »
I am retired from racing my FED so......

14
 SOLD IT THANKS!! Guys Look!
I buy every Frameworks shifter I can find--usually a few a year--as you know they are the lightest, best FED PG shifters ever made--Many of you run one--but guess what? You always have to use a BM or home made trans lever bracket with the WRONG geometry--it can be a royal PIA to make them work Correctly!!!
I scored this New Old Stock--not made since the 80's factory PG shift lever bracket in package with instructions etc never opened!! I should open and copy but I am not
Once in a lifetime chance to get one
$75 shipped free   hey copy and sell them and make some $$ not me I am retired and not interested
Yep that is high $ but to make that beautiful shifter you have work right this is the oddball piece you need
calls 704 244 6649 or email dusterdave173@gmail.com

15
Wanted to buy / SW GREENLINE OIL GAUGE
« on: August 15, 2019, 11:45:12 AM »
looking for an old Stewart warner greenline oil pressure gauge to put in my 66 Chevy C10  can look crusty long as it works  just can't put a new one in my oldie email  dusterdave173@gmail.com Thanks

Pages: [1] 2 3 ... 9