FrontEngineDragsters.Org Forum
Classifieds (Please No Dealers) => Wanted to buy => Topic started by: tkrupa on October 11, 2016, 01:32:58 PM
-
I want to buy a Tuttle FED 225" roller or complete. Anyone know of one for sale?
-
You could always call Dave Tuttle, he may know of a car for sale. I have a 225 Tuttle JF, but not interested in selling. there will be a few Tuttle cars at the CHRR, Oct 20-23.
Jon , Hayden wheels, 800-624-3803
-
Deal of the century Kenny Welch has a really bitchen Roo Man roller for sale, painted, chromed ,sfi certifyed, lots of new parts and very few runs, wants to go with an altered.
Steal it for $17,500
-
http://www.insidetopalcohol.com/threads/front-motor-top-fuel-late-model-nostalgia-car-for-sale.57192/
guy selling a Sterling 225" has turnkey price but might sell chassis as roller ?
-
Deal of the century Kenny Welch has a really bitchen Roo Man roller for sale, painted, chromed ,sfi certifyed, lots of new parts and few runs, wants to go with an altered.
Steal it for $17,500
Kenny builds Street Rods and it shows in how clean and detailed this car is!!
-
I have always admired Dave Tuttle's chassis. The way the driver sits low behind the driver. When California Chassis Engineering was in Chatsworth, his shop was around the corner from my office. If his door was open during my lunch break (he mostly worked at night), I'd walk over and check out his work.
Kenny Welch's car is super nice. He ran a SBC and not sure it will take a big CI Hemi.
TK are you going to through your hat in the A/F arena?
-
consider that there were not that many built, Dale Taros has one( X Dave Sammons), Sanders Bro. have one( X Mike Joyce) , Shane Stewart has the old X "ginz" car. Mr, Boston is still back east( X Brendans??)
-
consider that there were not that many built, Dale Taros has one( X Dave Sammons), Sanders Bro. have one( X Mike Joyce) , Shane Stewart has the old X "ginz" car. Mr, Boston is still back east( X Brendans??)
I race with 4 Tuttle cars
Sanders Bros
Nick which is an ex Comp Eliminator car Magnesium body
Ralph owns (2) one is a 185" ex NE1 car the other I believe is an ex A/fuel car from California
-
Here is Ralph's 185" car
-
Use to run around with Mike Joyce, Sanders bought a real nice car.
Doc Bates has a Tuttle Chassis too.
-
Stu Sandhaus is running a Tuttle car out here. He had it out at Pittsburgh with us 2 weeks ago. His is 50"out and running in A/ND trim.. Ran a couple 7.0's in test trim..
-
I
Kenny Welch's car is super nice. He ran a SBC and not sure it will take a big CI Hemi.
Rather than not be sure it will take a big cube Hemi , why don't you ask? I saw that advertised some where the other day and it seemed like a mighty nice car. You are aware Rooman hosts the construction section of this forum ?
-
consider that there were not that many built, Dale Taros has one( X Dave Sammons), Sanders Bro. have one( X Mike Joyce) , Shane Stewart has the old X "ginz" car. Mr, Boston is still back east( X Brendans??)
Frank Colaneri now owns the old "Mr Boston" car. It is presently called "The Racketeer", painted pearl white/candy green, stack injected on nitro. Like all of Frank's cars, it is absolutely gorgeous.
-
I have a 225" dave uyehara ill sell.
-
I
Kenny Welch's car is super nice. He ran a SBC and not sure it will take a big CI Hemi.
Rather than not be sure it will take a big cube Hemi , why don't you ask? I saw that advertised some where the other day and it seemed like a mighty nice car. You are aware Rooman hosts the construction section of this forum ?
My comment was not intended to be a knock on Mr. Burgan's work, the car or Kenny Welsh. I have met both gentlemen and have seen the car first hand. It is a work of art.
It was meant to say that the crank sits lower in a hemi than a Chevy, so the driveline angle will need to be modified in addition to the other chassis modification that would need to be done. The question becomes, would it be worth it.?
TK, Bill Wayne use to run a Tuttle car in A/F before switching to a Sterling chassis. Don't know whatever became of the old car, but you may think to hit him up.
-
TK, this may be as close to what you are looking for as could be found.
http://www.racingjunk.com/Nostalgia/182791493/Dragster-and-Trailer-with-All-Parts.html
-
Just checking in to see if you found a Tuttle car? I just learned of a 200" Tuttle car that will be coming up for sale soon.
-
TK if you're still in the market for a Tuttle car. Here is one:
https://www.racingjunk.com/Nostalgia/183006623/Tuttle-nostalgia-200-fed.html
-
TK if you're still in the market for a Tuttle car. Here is one:
https://www.racingjunk.com/Nostalgia/183006623/Tuttle-nostalgia-200-fed.html
That’s funny that is the car I knew about also
-
If I were to ever get one for myself, it would be a Tuttle car. I've always like the look of the driver sitting low behind the engine.
-
Dave does build some nice cars! Ralph the gentleman selling the car listed has 3 of them! I am to thrifty and just look at pictures and build my own
-
Nothing wrong with building your own. If you know what your doing.
Saw Dave pop his head up on facebook a couple of weeks ago. Glad to see he's still working it.