Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - mrmopartech

Pages: [1] 2
1
Wanted to buy / mopar conneting rods
« on: June 22, 2023, 12:54:03 PM »
looking for 2-3 BME aluminum connecting rods that are stock center to center length,marking on the rod is 426,and the pin is stock mopar1.094.
contact me at : penstarperformance426@gmail.com or 514 659 0445,Scott

2
Wanted to buy / Hemi dry sump system
« on: May 14, 2022, 08:52:29 AM »
Looking to by a hemi/RB dry sump system for my RB rear engine dragster,looking for all type and prices,Scott/mrmopartech  514 659 0445

3
Wanted to buy / Hemi/440 dragster oil pan
« on: June 26, 2021, 02:26:49 PM »
I am in need of a steel or alley oil pan for my dragster.This needs to be very low pan,as there is not much clearance to the bottom of the frame,like 4.75-5.0 inches.Now if it can be cut and made smaller,I would consider it,but need pics of the pan first.I can be contacted at:  penstarperformance@gmail.com or text me at: 5146590445,mrmopartech/scott

4
Dan Dishon's Transmission Den / Mopar 727 race tranny parts
« on: May 24, 2019, 06:28:58 PM »
Looking for any race tranny parts to help build a shorty 727 mopar big block unit,email me or call. penstarperformance@gmail.com or 514 659 0445.mrmopartech/scott

5
Rear Engine Dragsters / Front suspension
« on: May 24, 2019, 06:20:37 PM »
Has anyone every put a independent front suspension on there digger or have pictures of there car with it and how well it works,mrmopartech    penstarperformance@gmail.com Please post or send pics,thanks,scott

6
Wanted to sell / Big block mopar engine and dragster parts neede
« on: April 02, 2019, 01:15:35 PM »
Looking for race parts for a B or RB wedge parts and dragster rear engine parts,zoomie headers,power glide tranny or 727 or 904 race tranny,9 inch ford diff parts,any thing that can help,mrmopartech
Email me pics at:  penstarperformance@gmail.com   or text me on my phone at: 5146590445
thanks guys and gals. Thanks Scott

7
Wanted to buy / Mopar big block race parts
« on: December 23, 2018, 12:00:02 PM »
Looking for all types of mopar race parts for a big block with alky injection.If you have any thing,either email me or call me:
penstarperformance@gmail.com  5146590445 thanks Scott/mrmopartech

8
Front Engine Dragsters / Sixties front engine dragster owner/builder
« on: June 07, 2018, 11:45:26 AM »
we are looking for info about a dragster we have, built by or owned by a guy name (last name of ) Piper.It was run with a blown hemi and set 5-7 national records and won events as well.Anyone with info please contact me at:penstarperformance@gmail.com
The car was blue,short wheel base,looking for pictures or people to contact about the car,thanks Mrmopartech

9
Front Engine Dragsters / A nother RED digger
« on: January 15, 2018, 03:15:49 PM »
Well a great came along and my buddy and I jumped on this RED that the gut wanted out of his garage due to space,as he needed room for number 5&6 pro mod cars and 2 funny cars,some people have to much money.Any ways,here are some pics of the new ride.It has no power train,but we have a line on a 477 big block chevy and a glide,wish us luck,mrmopartech

10
Front Engine Dragsters / Front engine digger wheelie bars
« on: August 12, 2017, 05:25:13 AM »
Looking for pictures of wheelie bars used on front engine  diggers as we had a minor problem a few weeks ago.After installing a new P/G,with trans brake and new convertor,and doing some regular passes we launch on the trans brake and went straight up.The front wheels from pictures where at least 6-8 feet in the air,and my driver did not pedal the car and well,damage happened big time,wheels are done,front end damage,nothing that 600-1000$ can,t solve.So if you have pictures,send them along to me at:

penstarperformance@gmail.com

thanks,mrmopartech/Scott Preston

11
Drag Racing / First run cost
« on: April 09, 2017, 07:13:55 AM »
Trying to and not have the wife find out what it cost to get our diggers to do their first runs.I am starting from scratch with having a motor and tranny and spare parts ,buying a digger and trailer and all the cost setting them up and being able to make the car run down the track at a proper speed.Right now we are in the 20-25 grand mark canadian,mrmopartech

12
Wanted to sell / Ramchargers Dana 60 magnesium differential
« on: November 21, 2016, 07:24:31 PM »
For sale is a complete dana 60 magnesium differential with bolt on axle tubes and cover and might also have the axles.Any one interested in it is to email me at : penstarperformance@gmail.com    for pictures and prices,thanks mrmopartech

Since money is tight for most people these days,I could do a trade for big block mopar parts or chevy parts,mrmopartech

13
Rear Engine Dragsters / RED cockpit intwerior
« on: November 10, 2016, 04:37:57 PM »
Looking for interior ideas for the new digger for a proper looking interior material and what some of you have used before and now,with some pictures to see what some have done,mrmopartech

14
Jon's Wheel House / front tires for RED
« on: November 08, 2016, 08:13:46 PM »
Looking for a pair of 22 x 2.50-17 front tires in new condition or slightly used,or a place for a great deal on the tires,Mrmopartech/scott

15
Rear Engine Dragsters / Birthdat present of all time
« on: November 06, 2016, 05:30:13 PM »
Well for a day before the big day,it went great,as I picked up the 215 inch hard tail dragster from just outside Quebec city limits and brougth it back home into the garage in St.Lazare quebec.For what I paid and what I got it was a deal to really be greatful of.Weld pro star wheels and goodyear slicks rear and front runners,all the guages,body panels,front and rear mid plates,9 inch ford 4.56 gears,chute,rear &front wings,battery,switches,scoop,starter,fuel pump,etc,3800$canadian=3000US.Car was built in 1988,need to find the cert tag which is on the car some where,but will find out more from you guys and internet searches,mrmopartech
Pics will come soon,thanks.

Pages: [1] 2