FrontEngineDragsters.Org Forum

Drag Racing Discussions => Front Engine Dragsters => Topic started by: opa1 on March 26, 2018, 07:03:09 PM

Title: 25" PG Planetary
Post by: opa1 on March 26, 2018, 07:03:09 PM
I'm having to use a PG with the shorter 9" tailhousing in my FED. The output shaft is about 2" shorter that a standard length PG. The only planetary I have in that length is a 16 spline 1:76 from a early PG unit. Has anyone seen or heard of a planetary like this with 27 spline output shaft?

This is a older Jr. Fuel car. It had a PG with the 27 spline shorter shaft. It didn't come with the car.
Title: Re: 25" PG Planetary
Post by: opa1 on March 27, 2018, 10:25:57 AM
Problem solved. I can cut the std. length shaft. I'll still have about 1 3/4" of splines for the MW/1350 yoke to fit.
Title: Re: 25" PG Planetary
Post by: racerken on March 27, 2018, 12:19:00 PM
Done it before.  Just cut it to length with a hack saw.