FrontEngineDragsters.Org Forum

Classifieds (Please No Dealers) => Wanted to buy => Topic started by: sandhopper2 on December 04, 2018, 09:47:41 AM

Title: ford 9 inch rear end
Post by: sandhopper2 on December 04, 2018, 09:47:41 AM

Looking for a Ford 9" rear for a rear engine dragster project , or maybe someone that can shorten the one I have . I'm is Socal so loacl is best

Title: Re: ford 9 inch rear end
Post by: tdracer on December 10, 2018, 06:46:48 AM

I have a 9" floater out of a RED, Braced housing,  complete, brakes, hats, MW steel center section, axles, gears and male coupler half. Not Local (Detroit) but it may be worth you getting it trucked.

Shoot me an email or text and i will get you some pics.  519-919-3929  brian.peeters@gmail.com

Title: Re: ford 9 inch rear end
Post by: sandhopper2 on December 29, 2018, 09:54:38 AM

thanks TDracer , I'm on a very limited budget
I have found the Jig to shorten the housing so really looking for just the 31 spline axles
I have a center with spool and a new disk brake steup and don't want to resell that stuff

Title: Re: ford 9 inch rear end
Post by: hemidakota on December 30, 2018, 07:00:33 AM

I have a brand new set of strange 31 spline axles and new center section with 4.10 gears, Daytona pinion support and spool. Upgraded to 40 spline. Will try to get axle measurements today and post.

Title: Re: ford 9 inch rear end
Post by: dreracecar on December 31, 2018, 08:19:01 AM

Sent you a PM
just down the Fwy in Gardena
$425

Title: Re: ford 9 inch rear end
Post by: sandhopper2 on January 05, 2019, 05:13:48 PM

Quote from: hemidakota on December 30, 2018, 07:00:33 AM

I have a brand new set of strange 31 spline axles and new center section with 4.10 gears, Daytona pinion support and spool. Upgraded to 40 spline. Will try to get axle measurements today and post.

Did you get the measurements and any idea of your price ?