FrontEngineDragsters.Org Forum
Classifieds (Please No Dealers) => Wanted to sell => Topic started by: 23T Hemmee on April 20, 2016, 10:18:02 AM
-
Keith Black 4.750" Stroker crank-Last run as Injected Alky 608" 11.220" Tall Deck in Front Engine Dragster 7.22@192+. Mains are 2.746-2.7465" and rods are 2.3725-2.373". Don't know bob-weight, bought as a complete assembly, but probably 2750-2800. Not a trick Bryant or Winberg but a good solid crank. Could stand a polishing, pulled the assembly out to use block for a blower build, been sitting since. Have BME-JE 7.505" rods and 4.510" 1.35CH pistons but only know the history for the two years we ran them. You would have to have a tall-deck to run them, although they could actually work in a big-bore standard block with a 3.750" crank, give you a 479" but rod/stroke ratio would be in the ozone, 2-1 I think. Never know, somebody out there might be crazy enough to try it. Anyway, crank needs a new home, just sitting in the shop collecting dust. **NEW PRICE** $1200.00 shipped to lower 48. MO or Paypal, PM me here, Thanks.