FrontEngineDragsters.Org Forum

Technical => Dan Dishon's Transmission Den => Topic started by: noslin on February 18, 2018, 09:19:56 PM

Title: PG cooler loop line hose size
Post by: noslin on February 18, 2018, 09:19:56 PM
what size hose should i get for looping the line on the cooler in/out fittings.  -6 or -4?   idea on length of hose.  figure id get a pre-made one.
Title: Re: PG cooler loop line hose size
Post by: Paul New on February 18, 2018, 09:22:36 PM
Mine was -6
Title: Re: PG cooler loop line hose size
Post by: noslin on February 19, 2018, 06:18:04 PM
Thanks Paul
Title: Re: PG cooler loop line hose size
Post by: bikeguy307 on February 20, 2018, 07:46:43 PM
-6 is the standard. -4would be to restrictive. If you have someone who can pull the pump and remove the bypass you can put pipe plugs in case. As far as length goes 12" would be as short as I think you get away with, without kinking it.