FrontEngineDragsters.Org Forum
Drag Racing Discussions => Front Engine Dragsters => Topic started by: MikenMpls on January 19, 2020, 08:46:27 AM
-
I need a "longer than commercially available" wheelie bar net in the triangle shape. I have reached out to two companies and both apparently do not want to make one. Has anyone here had one made? If so which company did the net? Thanks!
-
Any shop that makes boat awnings / flying bridges / covers / etc has the capability to sew nylon webbing. I would just go to Harbor Freight or equivalent, buy a bunch of webbing as used on ratchet straps, lay the pattern out on a piece of cardboard and ask them to sew it together. For additional fire resistance you could soak it in a borax solution.
-
Pretty sure DJ Safety can set you up.
-
I gave Ben Conant a call @ DJ, told them how long i wanted it, how wide at the top & how wide at the bottom. A couple days later a bitchen net showed up in a box. :) great service.
-
Thanks for the referral's!
-
stroud made mine and was quick about it.
-
Just as you said one call to DJ Safety and it was a done deal! Can't thank you guys for the suggestion and Big Ben at DJ Safety enough for the service. I now have a great fitting wheelie bar net and will not stress out about the chute getting hung up on the bars...