FrontEngineDragsters.Org Forum

Classifieds (Please No Dealers) => Wanted to sell => Topic started by: dusterdave173 on January 18, 2018, 12:19:00 PM

Title: SBC MILODON DRAGSTER OIL PAN
Post by: dusterdave173 on January 18, 2018, 12:19:00 PM

I have a perfect Milodon #31145 box type dragster oil pan for SBC two pc rear seal DS dipstick  comes with pick up
This pan is EX cond no issues   price on these has gone through the roof they are now over $400 with pick up near $50 at Summit jegs etc  I will take $350 shipped free  can't beat it if you need one
email is best dusterdave173@gmail.com   or phone 704 244 6649   Thanks David

Title: Re: SBC MILODON DRAGSTER OIL PAN
Post by: ss4 on January 30, 2018, 10:42:30 AM

Dave,  what is the depth at the back of the pan? is the pickup straight down or a tube neck deal.

Title: Re: SBC MILODON DRAGSTER OIL PAN
Post by: dusterdave173 on January 30, 2018, 11:57:50 AM

from block it is 7 1/2 inch but with a one piece pan gasket I would say add 3/16ths or so  I have a mile of room under my Worm with diaper and 33 in tires  pix of pick up here--it has tube that slides in pump then bolts on pump--I have run these for years work fine double trap doors etc  Thanks  my phone 704 244 6649 eastern time decent hours

Title: Re: SBC MILODON DRAGSTER OIL PAN
Post by: dusterdave173 on January 30, 2018, 03:14:53 PM

$320 shipped free if that helps

Title: Re: SBC MILODON DRAGSTER OIL PAN
Post by: ss4 on January 30, 2018, 04:32:42 PM

sounds Good and you mean Chassis Farm Dragster. ;) sent you another email too.

Title: Re: SBC MILODON DRAGSTER OIL PAN
Post by: George on January 30, 2018, 07:04:45 PM

http://www.milodon.com/oil-pans/small-block-chevy-oil-pans.php