FrontEngineDragsters.Org Forum

Classifieds (Please No Dealers) => Wanted to buy => Topic started by: Merryknees on January 06, 2018, 02:11:04 AM

Title: 392 roller cam wanted
Post by: Merryknees on January 06, 2018, 02:11:04 AM

Wanted solid roller cam to suit methanol injected 671 blown 392 powered topolino altered.
Looking for a mid range profile between 5000 rpm - 7500 rpm which is not too hard on the valve train. I run after market billet roller rockers.
New or used considered, will take advise on the profile.
We are located on the Isle of Man UK.
BUT coming over to the March Meet so hopefully can collect there.

Would really appreciate help as struggling to find anyone reply to emails sent out.

Ian
ianmerry@wimanx.net
         

Title: Re: 392 roller cam wanted
Post by: hotrodpete on January 06, 2018, 06:14:16 AM

Are you on Facebook? 392 Hemi racing group. Shayne Stewart had one for sale. 
At the PRI show bullet racing was a favorite, they raced these and seem knowledgeable.
If you have the time in LA drop in to Isky, he's a hoot. 

If you don't mind I would love to meet up at Bakersfield. I'm  there all weekend, Peter

Title: Re: 392 roller cam wanted
Post by: Merryknees on January 06, 2018, 08:02:46 AM

Thanks for the reply Pete. Yes I have seen that add on the facebook page and messaged Shayne  ;)
Are you talking bullett racing cams? [googled]
Hope to call in a few speedshops when in LA so will add to list. Yes sure we can meet up in Bakersfield.
Nice Woody Willys
Here's my Willys

(https://farm3.staticflickr.com/2944/15217312450_aa6afc03ea_b.jpg)

Title: Re: 392 roller cam wanted
Post by: dusterdave173 on January 06, 2018, 10:30:16 AM

Ruben Racing Cams in Calif is guy that did all of Herberts grinds--he does early hemis and has the Herbert catalog
Ruben is pretty cool guy --last ones I ordered were reasonable

Title: Re: 392 roller cam wanted
Post by: Merryknees on January 06, 2018, 10:49:32 AM

Quote from: dusterdave173 on January 06, 2018, 10:30:16 AM

Ruben Racing Cams in Calif is guy that did all of Herberts grinds--he does early hemis and has the Herbert catalog
Ruben is pretty cool guy --last ones I ordered were reasonable

Do you have his email address. Tried their webpage and facebook but the contact pages will not work!

Title: Re: 392 roller cam wanted
Post by: LZ on January 06, 2018, 12:28:15 PM

Hello Ian:
Sent you an Email.
thank you
Luke

Title: Re: 392 roller cam wanted
Post by: hotrodpete on January 06, 2018, 02:09:41 PM

Yes, Bullet racing cams and another company were together at PRI. Very helpfully. But I think they are in the New Orleans area. I can forward more info when I get back home.
 Try Brendan Murray also, he moves a bunch of stuff.

Title: Re: 392 roller cam wanted
Post by: racerken on January 06, 2018, 06:13:14 PM

Bullet Cams is located in Olive Branch, Mississippi