Topics

1

Roo Man's Room / forward facing steering arms and ackerman

« on: January 26, 2015, 05:00:04 PM »

Hi guys, I previously posted this in the wrong place I guess just too tired from lots of ot. I know how to determin ackerman with the steering arms normally facing rear with a R&P  but on this new 250 inch car I would like to face the arms forward and put the tank right up to the axle which has a 2 inch offset and R&P steering. I'm just not sure which way to go and would like some help to do it right thanks, Chris.

2

Front Engine Dragsters / How to figure proper ackerman with a 2" offset front axle and FORWARD arms

« on: January 26, 2015, 03:30:35 PM »

Hello folks I'm looking for someone who can help me figuring the correct ackerman for my first car with forward facing steering arms with a 2 inch leading king pin boss. I know how to do it with the arms facing rearward just not totaly sure facing the opposite way. Any help out there from you chassis builders???

3

Wanted to buy / Camshaft driven Tri Drive like or similar to RCD's thats reasonably priced

« on: January 10, 2015, 01:06:09 PM »

HI all, I'm in need of a camshaft driven Tri Drive to run a fuel pump straight through the camshaft pump drive extention and drive two 44 amp MSD mags on the other two. RCD makes one and looking for a used one or one of similar desighn at a reasonable price I'm also looking for a used steering box in decent shape for my front motored NHRA A/FD [TAD]build let me know what you have thanks, Chris.