FrontEngineDragsters.Org Forum
Technical => Roo Man's Room => Topic started by: noslin on October 20, 2018, 04:56:09 PM
-
im adding weight bar straps to the chassis. i think your supposed to use 1/2" bolts for securement. i was planning on using some 1" x 1/8" strap. this would leave 1/4" at edges. what is legal or what would be recommend to safely do this.
thank you
dean
-
not sure it applies here,but most things read 1.5 times diameter of bolt from center. I think thats exact wording. Meaning if using 7/16 you have to have 7/16 material remaining after hole. So I took it anyway.
-
not sure it applies here,but most things read 1.5 times diameter of bolt from center. I think thats exact wording. Meaning if using 7/16 you have to have 7/16 material remaining after hole. So I took it anyway.
thank you, i found some 3/16 x 2" strap in my stash ill use.
dean
-
The bigger the strap- the less weight you need to bolt on