FrontEngineDragsters.Org Forum

Drag Racing Discussions => Front Engine Dragsters => Topic started by: speedbump on May 16, 2014, 01:06:58 PM

Title: 2 speed shifter
Post by: speedbump on May 16, 2014, 01:06:58 PM

Hi, Looking for info. on obtaining a 2 speed rear exit elec. shifter for my fed with a power glide trans. want something small narrow and completely one handed operation. I plan on mounting this shifter to the side of my chassis not on or over the rear end. Looking for names of manufactures who i can contact. any help. tci  hurst etc. are to big. Thanks Mike

Title: Re: 2 speed shifter
Post by: jspell on May 16, 2014, 01:13:49 PM

I have the Precision Performance shifter with electric solenoid, nice piece....one hand operation.  It's mounted with two studs off the frame.

Title: Re: 2 speed shifter
Post by: wideopen231 on May 16, 2014, 01:52:25 PM

Parks sells a nice tube shifter. I made one thats close but probably not as nice.Then I only have 10 bucks in it. got to get a electric solenoid for it. Wish I could find lighter weight one.

Title: Re: 2 speed shifter
Post by: George on May 16, 2014, 03:08:07 PM

Check these out.http://www.biondoracing.com/category/electric-shifters.html

I run the Quarter pro.

Title: Re: 2 speed shifter
Post by: gregm784 on June 02, 2014, 03:39:15 PM

I run an electric shift Quarter Pro. Great shifter. One handed operation too.

Title: Re: 2 speed shifter
Post by: Totally T on July 14, 2014, 03:34:21 AM

I have a old B-M that is the only one Ive ever saw...may be telling how old it is.. But I really like it. Shortys new car has a Aerospace Components shifter and if I was to ever need to switch it would be to that design.

Title: Re: 2 speed shifter
Post by: gregm784 on September 29, 2014, 04:03:57 PM

I have a quarter pro for sale.  Electric shift, rear exit. 

Still looking?

email me, greg@meansracing.com