FrontEngineDragsters.Org Forum
Technical => Spud Miller's Cave => Topic started by: crider on February 26, 2017, 03:05:50 PM
-
Almost finished gathering parts to put a real engine together for my car. I have picked up a hilborn stack injector for BBC, 2 7/16 butterflys, and I was curious as to how much air it is capable of moving. Anyone know the CFM of these units? Numbers per runner? Going on a 604" with heads that are doing 410 cfm at .700 lift
-
At least 410 cfm per runner. If you cut a 2 7/16 circle and it covers most of the port your fine
-
Ok, Thanks Bruce. I wasn't sure how much the dogleg in the runners hurt flow of the manifold