Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - MikenMpls

Pages: [1] 2 3 ... 6
1
Hilborn was purchased by Holley. Call them.

2
Front Engine Dragsters / Re: Which Ring and Pinion
« on: September 22, 2020, 08:33:52 AM »
strange has rears on sale (no shipping) so now is a great time to make a move.

3
Front Engine Dragsters / Re: Wheelie Bar net
« on: March 01, 2020, 10:34:53 AM »
Just as you said one call to DJ Safety and it was a done deal! Can't thank you guys for the suggestion and Big Ben at DJ Safety enough for the service. I now have a great fitting wheelie bar net and will not stress out about the chute getting hung up on the bars...

4
Front Engine Dragsters / Re: Wheelie Bar net
« on: January 21, 2020, 04:52:31 PM »
Thanks for the referral's!

5
Front Engine Dragsters / Wheelie Bar net
« on: January 19, 2020, 08:46:27 AM »
I need a "longer than commercially available" wheelie bar net in the triangle shape. I have reached out to two companies and both apparently do not want to make one. Has anyone here had one made? If so which company did the net? Thanks!

6
Wanted to sell / Re: Nostalgia T/F FED Rolling Chassis and Body
« on: September 25, 2019, 07:32:56 AM »
This Dragster is still for sale and ready for a new home. Considering offers so please don't be bashful. In the KC Missouri area.

7
Front Engine Dragsters / Re: Burndown breather puke tank
« on: July 02, 2019, 03:45:35 PM »
My next breather tank will include a port for the transmission vent. why have a separate tank for it when one will do.

8
Electronics / Re: Circuit Protection for a Winch
« on: April 24, 2019, 06:59:08 AM »
Thanks for the suggestion, I'll do that!

9
Electronics / Circuit Protection for a Winch
« on: April 23, 2019, 04:54:07 AM »
Just curious if anyone has a fuse for their Winch (Trailer)? I got a new Winch and it did not mention adding circuit protection for the device. They gave me everything to mount and wire the Winch but no fuses. Just seems strange to me that it would not have one. If it did have one what size fuse would it need to be? Not sure of the amperage used by a winch. Pulling an FED into the trailer does not take a lot but I struggle to push it in by myself. Thanks!

10
Front Engine Dragsters / Re: storing the wheelie bar in the Trailer
« on: January 06, 2019, 12:18:16 PM »
Finished! I hung it on the wall as you all suggested


Sent from my iPhone using Tapatalk

11
Front Engine Dragsters / storing the wheelie bar in the Trailer
« on: December 03, 2018, 05:24:22 AM »
Quick question, how are you storing your wheelie bars during transport in your trailer?  Making mounts in my trailer for a 6ft wheelie bar is proving to be difficult. I am looking for something simple but secure and lightweight. Thanks for your photos and suggestions!

12
Wanted to sell / Re: Nostalgia T/F FED Rolling Chassis and Body
« on: October 06, 2018, 07:22:42 AM »
Yes the car is still for sale and taking offers, it is missing the front wing and cowl so we are working this sale as a "what would you pay" vs. the traditional starting price. The cowl replacement will be work...

13
Jon's Wheel House / Proper Slick storage
« on: August 13, 2018, 07:45:41 PM »
Jon, is it OK to store the car with the slicks on the ground for long periods of time (months, Winter etc)? What would be the best way to keep the tires in good condition and the car properly supported? thanks!

14
Wanted to sell / Re: Nostalgia T/F FED Rolling Chassis and Body
« on: July 15, 2018, 06:59:35 AM »
Hey guys what price should I ask for this car?? Its in the Kansas City Market and not close to too many nostalgia events where they run TF.

15
Wanted to sell / Nostalgia T/F FED Rolling Chassis and Body
« on: July 08, 2018, 11:27:54 AM »
Former Diamond Dave Miller high seat NTF for sale in Midwest. Rolling Chassis and Body (minus cowl) ready for your powertrain. More pictures available. Can show car on Fridays , Saturdays or Sundays. Call Mike at 612 819 7002 or text same number. Thanks!

Pages: [1] 2 3 ... 6