FrontEngineDragsters.Org Forum

Classifieds (Please No Dealers) => Wanted to buy => Topic started by: 32bantam on July 30, 2016, 08:09:26 AM

Title: starter for Iron Duke
Post by: 32bantam on July 30, 2016, 08:09:26 AM

I fellow racer needs a aftermarket starter for a Iron Duke. (left side mount). Tilton (part# 54-10011) stopped making them and can't find anyone else.
Anybody got one lying around?
thanks,
Steve

Title: Re: starter for Iron Duke
Post by: masracingtd1167 on July 30, 2016, 09:45:21 AM

Steve Try going on inside comp racing forum . A lot of those guy's run that block in the 4 cyl classes !

Title: Re: starter for Iron Duke
Post by: dreracecar on July 30, 2016, 09:57:14 AM

all the basic starters are the same motor just the adapt is different, since Tilton is not making them anymore, you can always try and ask for the drawings/prints and machine your own.

Title: Re: starter for Iron Duke
Post by: H.G. Wells on July 30, 2016, 03:29:52 PM

Might try Greg Porter.
http://www.gpestarters.com/

Title: Re: starter for Iron Duke
Post by: 32bantam on July 31, 2016, 04:11:59 AM

Thanks for the suggestions !!!!  I will pass them along...