Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - lmdangerous

Pages: [1]
1
Wanted to sell / 1956 Chevy 265 sbc/ auto trans.
« on: November 25, 2015, 06:43:08 PM »
This is a pullout 265 engine / auto trans. Good runner. Complete tail shaft to fan/ In take to pan. 4 bbl Engine / distributor / ex manifolds.starter Etc. all there. Make a great period correct gasser drive train for the lower classes. Can document. 1000$ 662-542-0796.

2
Wanted to sell / OPEL KADET GASSER( roller) SOLD sold SOLD.
« on: December 08, 2014, 01:30:08 PM »
For sale -Opel Kadet Gasser . Roller - New chassis 2X4/ 10 point cage.Custom ladder bars, custom9 inch rear ( no center section) dummy axles. Custom I front tube axle, speedway springs etc , ford spindles ,gm hubs, rotors, etc. Custom rack and pinion steering.Tilt front end.  car needs aluminum interior, paint, and drive train- The hard part is done.Set up for sbc /glide/-will accept Hemi. Tires and wheels in photo do not go- A set of 5 spoke ( torque thrust ) wheels and tires will be put back on the front and go with the car.2500$ or best offer. CASH talks.
662-542-0796
LMD

3
Who /where is the closest track or tech inspector for a person to get a chassis recertified or certified. I am in Houston, MS . Closest NHRA was Memphis. Not sure if its NHRA or IHRA now. Would it be easier to go to the tech person. Last one I i did was at the track but who knows now - seems to change by the week. Anyone know of the closest tech guy to me. And yes I called NHRA, and left messages. No return calls yet.GOt a new car coming out - help please/
LMD

4
2  B and M clutch turbos
One is fresh( no passes), has a lakewood bellhousing for all chevy ,gm stuff, also has the deep aluminum racing pan, drice spuds etc. Steel billet flywheel , pressure plate (long style ) and a new 23 spline mcleod clutch disc. 1000$
second unit came from a  bad actor street car- has lakewood belllhousing( chevy GM etc) , aluminum race pan ,drive spud etc. no flywheel  or clutch 850$
662-542-0796
LMD

5
1 series 60 shifter , box, boot, cable, and trans bracket-good condition-250$
1 series 70 Quick click shifter and cover- no cable.200$ 662 542 0796
thanks LMD

6
Your Builds / Photo Gallery / 1967 Opel kadet / Gasser
« on: October 13, 2014, 12:33:43 PM »
Here is the other gasser build that happpens to be going on at the same time we are building the prefect. Hey I cant explain it - at one time we had two front engine rails also. If someone would buy the new S and W car we could get through a lot quicker. Funny how money always helps speed up build time.
This car was also a hemi/ clutch turbo set up , but as stated before some one decided they wanted the hemis really bad.This will also be powered by a  hilborn injected mouse with a clutch turbo.
LMD

7
Your Builds / Photo Gallery / 1949 prefect Gasser
« on: October 13, 2014, 11:07:44 AM »
This is the prefect build . We started off hemi and clutch turbo. A guy walked in one day and bought every hemi ( including the 417 donovan out of the rail) - that we had. Clutch turbos will stay - we will go with a hilborn injected mouse. ( on rat poison).
LMD

8
New 200 wb S & W front engine rail.( new sfi stickers- 7.50 cert) Set up for early hemi and glide. Sold the Donovan 417 that was in it. Mid plate so. Front plates also. Also includes fire bottles / new chute/ shifter- frame works /etc. 9 Inch with dual disc. Custom fuel tank. Custom front wing. Cage is set up for big driver( 20 in  wide on the inside)- Ansens on rear. New 17x2.25. Front Wheels and tires. Custom seat / engine turned back. Custom short  aluminum body. Custom wind shield -engine turned. Fresh out of paint. Never made a pass. Also includes legit 1965 enclose top fuel trailer. Dual axle electric brakes. 26 ft long. Pulls great. Many pics   18000$ for both.  662-542-0796.

Pages: [1]