FrontEngineDragsters.Org Forum
Technical => Dan Dishon's Transmission Den => Topic started by: Paul New on September 03, 2017, 04:35:11 PM
-
anyone have any pictures of setting up the clutch pack inside the transmission. I see how the drawings here http://www.bandjtransmission.com/index.php?option=com_content&view=article&id=56&Itemid=68 but I cannot get the numbers even close..... I know I am doing something wrong
-
Paul,
Are your numbers too tight or too loose?
Mark
-
I have no experience with these. Hope some guys in the forum can help.
-
Paul,
Are your numbers too tight or too loose?
Mark
I am not able that figure out the correct way to measure
-
I have no experience with these. Hope some guys in the forum can help.
No problem it is pretty simple inside just need the correct procedure
-
paul
call mike those guys are the very best at customer service!
1-866-781-1064 toll free
-
I'm in Australia and about to service my B&J for the first time (and swap gear packs from 55% to 44%).
Any enlightenment on this procedure would be very greatly appreciated, particularly the clutch pack set up Paul asked about.
I can find several youtube videos about the lenco transmissions, but nothing on B&J.
Cheers
Graham