FrontEngineDragsters.Org Forum
Drag Racing Discussions => Front Engine Dragsters => Topic started by: cj92345 on May 30, 2014, 09:20:40 AM
-
just changed the gear ratio in my 8 3/4 olds and after getting it back together thought should I have greased the coupler? wasn't any in there when I took it apart, but should it have some?
thanks in advance
-
8 3/4 "OLDS"??? I always use a little anti-seeze before install but if its all together some spray graphite could be used but since there is no movement within the mesh its not nessasary to grease
-
All the top fuel teams used to and maybe still use Krytox grease--crazy expensive made for the space shuttle or some such--stupid expensive but...my top fuel crew pal said the stuff Really Works for no wear in coupler
again--when you look up the price you will shudder!
I used a tad of anti seize on mine --not too much or it will sling it all over everything
-
I lube mine about every other year. No wear noticeable at all.
I use dry graphite.