FrontEngineDragsters.Org Forum
Technical => Jon's Wheel House => Topic started by: wideopen231 on November 24, 2018, 08:16:57 AM
-
Best way to equalize rollout on slicks. I have new set of slicks that where pretty much dead equal.Been on car for year,on warmup stand. Checked them today and almost 1" difference with both at 7 psi(expected area of race pressure) and almost 1" difference. I know zero difference almost impossible,but closer the better. Best way to equalize?
-
tried shrinking larger tire. dropped pressure to 2 psi,set blow heater about 12 feet away,rotated tire every cpl minutes until even temp about 120,let cool and aired up to 7 psi. Dang almost dead on about 1/4" difference.Now how long will it stay?